Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for A25A-FKS)
RM3620E _54 Brake _076411 BRAKE SYSTEM (OTHER) _0376692 VACUUM PUMP(for A25A-FKS) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for A25A-FKS)  DISASSEMBLY  


PROCEDURE

Hide 29314A 1.REMOVE END COVER

a.
C372748

Using a T30 "TORX" socket wrench, remove the 5 screws and end cover.

NOTICE:
·

Hold the pump so that the pump installation surface and fitting parts will not be damaged.

·

As the housing deforms when force is applied, do not secure the housing with a tool such as a vise.

·

Securely fit the T30 "TORX" socket wrench to the screws.

·

Do not drop the end cover.

·

Do not damage the end cover.




b.
C373391C01
1.802,1.115 1.99,0.813 1.99,0.813 2.313,0.813 false 2.344,0.74 2.656,0.896 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the vacuum pump cover O-ring.

NOTICE:

Do not damage the groove.



Hide 29331A 2.REMOVE VACUUM PUMP VANE

a.
C373392

Remove the vacuum pump vane together with the 2 vacuum pump vane caps.


b.
C169339C02
2.708,0.667 2.708,0.344 2.708,0.344 2.323,0.344 false 1.323,1.375 1.323,1.583 1.323,1.583 1.646,1.583 false 0.531,1.531 0.531,1.802 0.531,1.802 0.844,1.802 false 1.667,1.5 2.01,1.708 0.344,0.208 10 false *2 0.865,1.708 1.135,1.865 0.271,0.156 10 false *1 2.115,0.26 2.365,0.427 0.25,0.167 10 false *1
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Remove the 2 vacuum pump vane caps from the vacuum pump vane.