Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0376841 VSC OFF SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH  INSPECTION  


PROCEDURE

Hide 84988L 1.INSPECT VSC OFF SWITCH

a.
C409084C01
2.75,1.854 2.573,1.854 2.573,1.854 2.083,1.323 true 1.448,1.333 0.917,1.823 0.917,1.823 0.76,1.823 true 0.104,0.104 0.365,0.313 0.26,0.208 10 false *a 0.583,1.719 0.958,1.917 0.375,0.198 10 false + 2.844,1.76 3.063,1.917 0.219,0.156 10 false E
*a Component without harness connected
(VSC OFF Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (+) - 2 (E) Pushed Below 1 Ω
Not pushed 10 kΩ or higher


If the result is not as specified, replace the VSC OFF switch.


b.
C409084C02
0.698,1.667 0.865,1.667 0.865,1.667 1.25,1.333 true 2.823,1.635 2.635,1.635 2.635,1.635 2.302,1.313 true 0.094,0.115 0.396,0.323 0.302,0.208 10 false *a 0.354,1.552 0.76,1.74 0.406,0.188 10 false ILL+ 2.906,1.542 3.292,1.74 0.385,0.198 10 false ILL-
*a Component without harness connected
(VSC OFF Switch)


Apply battery voltage between the terminals of the switch, and check the illumination condition of the VSC OFF switch.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 6 (ILL+)
Battery negative (-) → 1 (ILL-)
Illuminates


If the result is not as specified, replace the VSC OFF switch.