Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › DOWNHILL ASSIST CONTROL SWITCH
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0376849 DOWNHILL ASSIST CONTROL SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  DOWNHILL ASSIST CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84010D 1.CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY (DOWNHILL ASSIST CONTROL SWITCH)

a.
C331272C30
2.427,1.719 2.26,1.719 2.26,1.719 2.094,1.302 true 1.375,1.76 1.458,1.76 1.458,1.76 1.625,1.323 true 2.521,1.635 2.906,1.865 0.385,0.229 10 false E 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 1.198,1.677 1.656,1.917 0.458,0.24 10 false B
*a Component without harness connected
(Downhill Assist Control Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
16 (E) - 19 (B) Switch pushed Below 1 Ω
Switch not pushed 10 kΩ or higher


HINT:

If the result is not as specified, replace the integration control and panel assembly (downhill assist control switch).