Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
88899M
1.REMOVE AIR FILTER COVER PLATE
|
Pinch |
|
Rotate in this Direction |
|
Remove in this Direction |
Lightly pinch the area shown in the illustration and rotate the claw in the direction indicated by the arrow shown in the illustration to detach it.
Pull in the removal direction shown in the illustration to detach the guide and remove the air filter cover plate.
88548B
2.REMOVE AIR FILTER CASE
for LHD:
Remove the air filter case.
for RHD, Two Layer Blower Type:
Use the same procedure described as for the LHD vehicle.
87139C
3.REMOVE CLEAN AIR FILTER
for LHD:
Detach the guide and remove the clean air filter.
for RHD, Two Layer Blower Type:
Use the same procedure described as for the LHD vehicle.
for RHD, Single Layer Blower Type:
Remove the clean air filter.
87103B
4.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Remove the 3 screws and blower motor with fan sub-assembly.
87130K
5.REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws.
| *A | for LHD | *B | for RHD |
| *C | for Two Layer Blower Type | *D | for Single Layer Blower Type |
Detach the guide and remove the No. 1 blower damper servo sub-assembly.