Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
88650N
1.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
| *A | for Type A |
| *B | for Type B |
Connect each connector.
for LHD:
Insert the air conditioning amplifier assembly into the guide as shown in the illustration.
| *A | for Type A | *B | for Type B |
|
Insert in this Direction |
|
Rotate in this Direction |
Rotate, and then attach to the guide as shown in the illustration.
| *A | for Type A |
| *B | for Type B |
Move the air conditioning amplifier assembly in each direction shown in the illustration to check that the guide is securely engaged.
Install the air conditioning amplifier assembly with the screw.
Attach the clamp.
for RHD:
Insert the air conditioning amplifier assembly into the guide as shown in the illustration.
| *A | for Type A | *B | for Type B |
|
Insert in this Direction |
|
Rotate in this Direction |
Rotate, and then attach to the guide as shown in the illustration.
| *A | for Type A |
| *B | for Type B |
Move the air conditioning amplifier assembly in each direction shown in the illustration to check that the guide is securely engaged.
| *A | for Type A |
| *B | for Type B |
Install the air conditioning amplifier assembly with the screw.
78010F
2.INSTALL ACCELERATOR PEDAL ASSEMBLY (for LHD)
for A25A-FXS:
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>ACCELERATOR PEDAL SENSOR>INSTALLATION
for A25A-FKS:
Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>ACCELERATOR PEDAL>INSTALLATION
for M20A-FKS:
Click hereEngine / Hybrid System>M20A-FKS (ENGINE CONTROL)>ACCELERATOR PEDAL>INSTALLATION
3.PERFORM REGISTRATION (w/ Stop and Start System)
for A25A-FKS:
Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM (for A25A-FKS)>REGISTRATION
for M20A-FKS:
Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM(for M20A-FKS)>REGISTRATION