Home › Vehicle Interior › HEATING / AIR CONDITIONING › HUMIDITY SENSOR › 2018.10–2020.08
RM3620E _58 Vehicle Interior _076130 HEATING / AIR CONDITIONING _0374933 HUMIDITY SENSOR A

HEATING / AIR CONDITIONING  HUMIDITY SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure as for the LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 89944A 1.INSTALL AIR CONDITIONING THERMISTOR TAPE (w/ Humidity Sensor)

HINT:
E414705C01
1.729,0.667 2.479,0.667 true 1.719,0.667 2.469,0.667 true 0.885,2.156 1.365,2.156 true 1.635,1.365 1.792,1.542 0.156,0.177 10 true *1 0.719,2.052 0.979,2.385 0.26,0.333 10 false *a 2.51,0.573 2.771,0.906 0.26,0.333 10 false *a
*1 Air Conditioning Thermistor Tape
*a Heat Transferring Sheet


·

The air conditioning thermistor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.

·

If the heat transferring sheet is extremely dirty or damaged, replace the air conditioning thermistor assembly with a new one.

·

Use the same procedure described as for the rain sensor tape.

Click hereVehicle Exterior>WIPER / WASHER>RAIN SENSOR>INSTALLATION



Hide 88620E 2.INSTALL AIR CONDITIONING THERMISTOR ASSEMBLY (w/ Humidity Sensor)

NOTICE:

Do not use an air conditioning thermistor assembly that has been dropped.


a.

Clean the windshield glass with a piece of cloth.

NOTICE:
·

Make sure that there is no air conditioning thermistor tape residue remaining on the windshield glass. If there is, remove the residue.

·

If there is any air conditioning thermistor tape residue remaining on the windshield glass, replace the air conditioning thermistor tape.




b.

When installing a new air conditioning thermistor assembly or when the air conditioning thermistor tape has been replaced:

i.

Peel off the release sheet.

NOTICE:

Do not touch the silicon coated surfaces of the air conditioning thermistor tape.




c.

Connect the connector.


d.
E407971C01
0.896,1.885 0.896,1.552 true 0.813,1.865 1.125,2.063 0.313,0.198 10 false *a
*a Stopper
V113147

Install in this Direction
V113148

Lock


Gradually attach the air conditioning thermistor assembly to the windshield glass surface as shown in the illustration to prevent air bubbles from forming between them.

NOTICE:

Do not touch the silicon coated surfaces of the air conditioning thermistor tape or the windshield glass surfaces.



e.

Push in the stopper to install the air conditioning thermistor assembly as shown in the illustration.


Hide 89437D 3.INSTALL SENSOR COVER (w/ Humidity Sensor)

HINT:

Use the same procedure described as for the rain sensor cover.

Click hereVehicle Exterior>WIPER / WASHER>RAIN SENSOR>INSTALLATION


Hide 89944 4.INSTALL RAIN SENSOR TAPE (w/ Rain Sensor)

Hide 89941 5.INSTALL RAIN SENSOR (w/ Rain Sensor)

Hide 89943 6.INSTALL RAIN SENSOR COVER (w/ Rain Sensor)