Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
88625Q
1.INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
|
Connector |
|
Aspirator |
Connect the aspirator.
Securely insert it up to the base.
Connect the connector.
Attach the claw to install the cooler thermistor (room temperature sensor).
Make sure that the aspirator is not bent in the middle or partly detached from the cooler thermistor (room temperature sensor).
73900
2.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY