Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for A25A-FKS)
RM3620E _58 Vehicle Interior _076130 HEATING / AIR CONDITIONING _0374935 COMPRESSOR(for A25A-FKS) A

HEATING / AIR CONDITIONING  COMPRESSOR(for A25A-FKS)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure as for the LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

Do not race the engine before replacing the compressor assembly with pulley.


Hide 2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 16361A 3.REMOVE V-RIBBED BELT

Hide 17750A 4.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 86510A 5.REMOVE SECURITY HORN ASSEMBLY (w/ Security Horn)

Hide 88704 6.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E406595

Remove the bolt and disconnect the suction hose sub-assembly.

NOTICE:

Do not apply excessive force to the suction hose sub-assembly.



b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88711 7.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E406596

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose.

NOTICE:

Do not apply excessive force to the No. 1 cooler refrigerant discharge hose.



b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88310 8.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

a.
E406597

Disconnect the connector.


b.

for Type A:

i.
E406598

Remove the 2 nuts.


ii.
E406599C01
0,0 0,0 false
V100135

Bolt
V100136

Stud Bolt


Using an E8 "TORX" socket wrench, remove the 2 stud bolts, 2 bolts and compressor assembly with pulley.



c.

for Type B:

i.
E414050

Remove the 4 bolts and compressor assembly with pulley.