Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
76622D
1.REMOVE FRONT FENDER MUDGUARD LH (w/ Mudguard)
76902A
2.REMOVE SIDE MUDGUARD SUB-ASSEMBLY LH
|
Clip |
|
Grommet |
Remove the clip.
Using a clip remover, remove the grommet.
|
Protective Tape |
Put protective tape around the side mudguard sub-assembly LH.
|
Remove in this Direction |
Detach the clip and remove the side mudguard sub-assembly LH.
Remove the 2 clips.
If the side mudguard sub-assembly LH has been removed, replace the clip with a new one.