Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
76902A
1.INSTALL SIDE MUDGUARD SUB-ASSEMBLY LH
Install 2 new clips.
If the side mudguard sub-assembly LH has been removed, replace the clip with a new one.
|
Install in this Direction |
Attach the clip and install the side mudguard sub-assembly LH as shown in the illustration.
Remove the protective tape.
|
Clip |
|
Grommet |
Install the clip.
Install a new grommet.
76622D
2.INSTALL FRONT FENDER MUDGUARD LH (w/ Mudguard)