Use the same procedure for the RH and LH sides.
The procedures listed below are for the LH side.
67864B
1.REMOVE FRONT DOOR NO. 2 WEATHERSTRIP LH
75074
2.REMOVE FRONT DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH
|
Protective tape |
Apply protective tape around the front door lower outside moulding sub-assembly LH.
Remove the hole plug.
Remove the nut.
|
Place hand Here |
|
Remove in this Direction |
Detach the clip and remove the front door lower outside moulding sub-assembly LH as shown in the illustration.