Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75793
1.REMOVE FRONT DOOR UPPER OUTSIDE MOULDING PAD
When removing the front door upper outside moulding pad, if it is difficult to remove, heat the adhesive of the front door upper outside moulding pad and front door lower outside moulding sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Front Door Lower Outside Moulding Sub-assembly LH | 40 to 60°C (104 to 140°F) |
| Front Door Upper Outside Moulding Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat front door lower outside moulding sub-assembly LH and front door upper outside moulding pad excessively.
Remove the front door upper outside moulding pad.
75392A
2.REMOVE NO. 1 OUTSIDE MOULDING RETAINER
Remove the No. 1 outside moulding retainer.