Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75797C
1.REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD
When removing the rear door upper outside moulding pad, if it is difficult to remove, heat the adhesive of the rear door upper outside moulding pad and rear door lower outside moulding sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Rear Door Lower Outside Moulding Sub-assembly LH | 40 to 60°C (104 to 140°F) |
| Rear Door Upper Outside Moulding Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear door lower outside moulding sub-assembly LH and rear door upper outside moulding pad excessively.
Remove the rear door upper outside moulding pad.
75392B
2.REMOVE NO. 1 OUTSIDE MOULDING RETAINER
Remove the No. 1 outside moulding retainer.
75768B
3.REMOVE REAR DOOR MOULDING PAD LH (except Off Road Package)
When removing the rear door moulding pad LH, if it is difficult to remove, heat the adhesive of the rear door moulding pad LH and outside moulding set LH using a heat light.
| Item | Temperature |
|---|---|
| Outside Moulding Set LH | 40 to 60°C (104 to 140°F) |
| Rear Door Moulding Pad LH | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the outside moulding set LH and rear door moulding pad LH excessively.
Remove the rear door moulding pad LH.
75798B
4.REMOVE REAR DOOR REAR OUTSIDE MOULDING PAD (except Off Road Package)
When removing the rear door rear outside moulding pad, if it is difficult to remove, heat the adhesive of the rear door rear outside moulding pad and outside moulding set LH using a heat light.
| Item | Temperature |
|---|---|
| Outside Moulding Set LH | 40 to 60°C (104 to 140°F) |
| Rear Door Rear Outside Moulding Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the outside moulding set LH and rear door rear outside moulding pad excessively.
Remove the rear door rear outside moulding pad.
75768B
5.REMOVE REAR DOOR MOULDING PAD LH (for Off Road Package)
When removing the rear door moulding pad LH, if it is difficult to remove, heat the adhesive of the rear door moulding pad LH and outside moulding set LH using a heat light.
| Item | Temperature |
|---|---|
| Outside Moulding Set LH | 40 to 60°C (104 to 140°F) |
| Rear Door Moulding Pad LH | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the outside moulding set LH and rear door moulding pad LH excessively.
Remove the rear door moulding pad LH.