53853B
1.REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD (except Off Road Package)
When removing the front No. 1 wheel opening extension pad, if it is difficult to remove, heat the adhesive of the front No. 1 wheel opening extension pad and front fender moulding sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Front Fender Moulding Sub-assembly LH | 40 to 60°C (104 to 140°F) |
| Front No. 1 Wheel Opening Extension Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the front fender moulding sub-assembly LH and front No. 1 wheel opening extension pad excessively.
Remove the front No. 1 wheel opening extension pad.
75798B
2.REMOVE REAR DOOR REAR OUTSIDE MOULDING PAD (except Off Road Package)
When removing the rear door rear outside moulding pad, if it is difficult to remove, heat the adhesive of the rear door rear outside moulding pad and front fender moulding sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Front Fender Moulding Sub-assembly LH | 40 to 60°C (104 to 140°F) |
| Rear Door Rear Outside Moulding Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the front fender moulding sub-assembly LH and rear door rear outside moulding pad excessively.
Remove the rear door rear outside moulding pad.
53855C
3.REMOVE FRONT NO. 5 WHEEL OPENING EXTENSION PAD (for Off Road Package)
When removing the front No. 5 wheel opening extension pad, if it is difficult to remove, heat the adhesive of the front No. 5 wheel opening extension pad and front fender moulding sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Front Fender Moulding Sub-assembly LH | 40 to 60°C (104 to 140°F) |
| Front No. 5 Wheel Opening Extension Pad | 40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the front fender moulding sub-assembly LH and front No. 5 wheel opening extension pad excessively.
Remove the front No. 5 wheel opening extension pad.