Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM3620E _58 Vehicle Interior _076046 DOOR LOCK _0377379 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69040A 1.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH (w/o Double Locking System)

a.
B340410C25
0.906,3.521 1.24,3.521 true 2.167,3.542 2.5,3.542 true 1.833,3.813 2.031,4.24 2.031,4.24 2.229,4.24 true 1.583,3.802 1.469,4.229 1.469,4.229 1.333,4.229 true 2.156,2.063 2.469,2.219 0.313,0.156 10 false *a 1.583,2.479 1.896,2.635 0.313,0.156 10 false *b 0.906,2.802 1.219,2.958 0.313,0.156 10 false *c 0.792,3.438 0.948,3.635 0.156,0.198 10 false L 2.563,3.469 2.823,3.667 0.26,0.198 10 false UL 0.948,4.156 1.51,4.365 0.563,0.208 10 false LSSR 2.271,4.167 2.427,4.365 0.156,0.198 10 false E
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock with Motor Assembly LH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


If the result is not as specified, replace the front door lock with motor assembly LH.



b.

Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
7 (E) - 8 (LSSR) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly LH.



c.
B347368C14
0.906,3.729 1.219,3.729 true 1.448,4.104 1.448,3.802 true 2.01,4.229 1.865,4.229 1.865,4.229 1.813,3.802 true 2.938,1.385 3.25,1.583 0.313,0.198 10 false *a 3.135,0.854 3.385,1.094 0.25,0.24 10 false *b 2.938,0.396 3.25,0.594 0.313,0.198 10 false *c 0.719,2.958 1.031,3.156 0.313,0.198 10 false *d 0.719,3.667 1.031,3.865 0.313,0.198 10 false UL 1.406,4.177 1.719,4.375 0.313,0.198 10 false L 2.063,4.167 2.375,4.365 0.313,0.198 10 false E
*a Unlock
*b Neutral
*c Lock
*d Component without harness connected
(Front Door Lock with Motor Assembly LH)


Check the operation of the door key lock and unlock switch (for LHD).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
9 (L) - 7 (E) Lock Below 1 Ω
9 (L) - 7 (E)
10 (UL) - 7 (E)
Neutral 10 kΩ or higher
10 (UL) - 7 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly LH.



Hide 69040A 2.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH (w/ Double Locking System)

a.
B532298C01
2.156,3.542 2.521,3.542 true 1.885,3.469 2.052,3.188 2.052,3.188 2.5,3.188 true 0.917,3.573 1.24,3.573 true 1.521,3.469 1.354,3.188 1.354,3.188 0.875,3.188 true 0.906,2.698 1.219,2.896 0.313,0.198 10 false *c 2.885,1.781 3.198,1.979 0.313,0.198 10 false *a 2.458,2.281 2.771,2.479 0.313,0.198 10 false *b 2.604,3.469 3.219,3.667 0.615,0.198 10 false UNDL 2.583,3.094 3.198,3.292 0.615,0.198 10 false DL 0.677,3.115 0.99,3.313 0.313,0.198 10 false UL 0.802,3.5 1.115,3.698 0.313,0.198 10 false L
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock with Motor Assembly LH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 3 (UL)
Locks
Auxiliary battery positive (+) → Terminal 3 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks
Auxiliary battery positive (+) → Terminal 2 (DL)
Auxiliary battery negative (-) → Terminal 1 (UNDL)
Set
Auxiliary battery positive (+) → Terminal 1 (UNDL)
Auxiliary battery negative (-) → Terminal 2 (DL)
Unset


HINT:
·

Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

·

Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.



If the result is not as specified, replace the front door lock with motor assembly LH.



b.
B532298C02
1.969,3.813 1.969,4.083 1.969,4.083 2.542,4.083 true 1.781,3.823 1.781,4.323 1.781,4.323 2.083,4.323 true 2.177,3.76 2.521,3.76 true 1.604,3.823 1.604,4.323 1.604,4.323 1.417,4.323 true 0.979,2.635 1.292,2.833 0.313,0.198 10 false *c 2.885,1.792 3.198,1.99 0.313,0.198 10 false *a 2.458,2.271 2.771,2.469 0.313,0.198 10 false *b 2.583,3.688 2.74,3.885 0.156,0.198 10 false E 2.615,4 3.156,4.219 0.542,0.219 10 false DLSR 1.01,4.25 1.479,4.438 0.469,0.188 10 false LSSR 2.146,4.26 2.302,4.458 0.156,0.198 10 false E
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock with Motor Assembly LH)


Check the operation of the door unlock detection switch and double lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
8 (LSSR) - 7 (E) Locked 10 kΩ or higher
8 (LSSR) - 7 (E) Unlocked Below 1 Ω
6 (DLSR) - 5 (E) Unset 10 kΩ or higher
6 (DLSR) - 5 (E) Set Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly LH.



c.
B532295C01
0.875,3.844 1.24,3.844 true 1.802,3.917 1.802,4.302 1.802,4.302 2.083,4.302 true 1.479,3.927 1.479,4.313 1.479,4.313 1.271,4.313 true 2.948,0.542 3.26,0.74 0.313,0.198 10 false *a 3.167,0.948 3.365,1.135 0.198,0.188 10 false *b 2.99,1.385 3.302,1.583 0.313,0.198 10 false *c 2.146,4.229 2.302,4.427 0.156,0.198 10 false E 0.656,3.771 0.906,4.021 0.25,0.25 10 false UL 0.885,2.74 1.198,2.938 0.313,0.198 10 false *d 1.146,4.229 1.396,4.479 0.25,0.25 10 false L
*a Lock
*b Neutral
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly LH)


Check the operation of the door key lock and unlock switch (for LHD).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
9 (L) - 7 (E) Lock Below 1 Ω
9 (L) - 7 (E)
10 (UL) - 7 (E)
Neutral 10 kΩ or higher
10 (UL) - 7 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69030A 3.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH (w/o Double Locking System)

a.
B340409C29
0.927,3.531 1.25,3.531 true 2.156,3.542 2.479,3.542 true 1.833,3.813 1.958,4.208 1.958,4.208 2.104,4.208 true 1.594,3.813 1.49,4.208 1.49,4.208 1.302,4.208 true 1.115,2.083 1.427,2.24 0.313,0.156 10 false *a 1.729,2.5 2.042,2.656 0.313,0.156 10 false *b 0.854,2.802 1.167,2.958 0.313,0.156 10 false *c 0.792,3.458 0.948,3.656 0.156,0.198 10 false L 2.552,3.469 2.802,3.667 0.25,0.198 10 false UL 2.167,4.125 2.677,4.333 0.51,0.208 10 false LSSR 1.177,4.135 1.333,4.333 0.156,0.198 10 false E
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock with Motor Assembly RH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L)
Unlocks


If the result is not as specified, replace the front door lock with motor assembly RH.



b.

Check the operation of the door unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
7 (LSSR) - 8 (E) Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock with motor assembly RH.



c.
B340408C12
1.969,3.813 2.156,4.219 true 1.604,3.792 1.49,4.198 true 2.177,3.76 2.552,3.76 true 0.604,0.531 0.917,0.729 0.313,0.198 10 false *a 0.406,0.958 0.719,1.156 0.313,0.198 10 false *b 0.635,1.406 0.948,1.604 0.313,0.198 10 false *c 0.792,2.865 1.104,3.063 0.313,0.198 10 false *d 2.604,3.646 2.917,3.844 0.313,0.198 10 false UL 2.146,4.26 2.302,4.458 0.156,0.198 10 false L 1.417,4.25 1.573,4.448 0.156,0.198 10 false E
*a Lock
*b Neutral
*c Unlock
*d Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the door key lock and unlock switch (for RHD).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Lock Below 1 Ω
6 (L) - 8 (E)
5 (UL) - 8 (E)
Neutral 10 kΩ or higher
5 (UL) - 8 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



Hide 69030A 4.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH (w/ Double Locking System)

a.
B532301C01
2.146,3.531 2.573,3.531 true 1.896,3.49 2.021,3.177 2.021,3.177 2.583,3.177 true 1.521,3.479 1.354,3.167 1.354,3.167 0.823,3.167 true 0.813,3.531 1.24,3.531 true 0.938,2.667 1.25,2.865 0.313,0.198 10 false *c 0.448,1.75 0.76,1.948 0.313,0.198 10 false *a 0.854,2.26 1.167,2.458 0.313,0.198 10 false *b 2.635,3.104 2.792,3.302 0.156,0.198 10 false L 2.625,3.458 2.906,3.646 0.281,0.188 10 false UL 0.615,3.458 0.896,3.667 0.281,0.208 10 false DL 0.427,3.104 0.917,3.302 0.49,0.198 10 false UNDL
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 2 (L)
Auxiliary battery negative (-) → Terminal 1 (UL)
Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 2 (L)
Unlocks
Auxiliary battery positive (+) → Terminal 4 (DL)
Auxiliary battery negative (-) → Terminal 3 (UNDL)
Set
Auxiliary battery positive (+) → Terminal 3 (UNDL)
Auxiliary battery negative (-) → Terminal 4 (DL)
Unset


HINT:
·

Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

·

Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.



If the result is not as specified, replace the front door lock assembly RH.



b.
B532301C02
2.219,4.417 1.604,4.417 1.604,4.417 1.604,3.823 true 2.448,4.083 1.802,4.083 1.802,4.083 1.802,3.813 true 0.958,4.427 1.448,4.427 1.448,4.427 1.448,3.833 true 0.917,3.76 1.208,3.76 true 0.969,2.729 1.281,2.927 0.313,0.198 10 false *c 0.438,1.76 0.75,1.958 0.313,0.198 10 false *a 0.865,2.24 1.177,2.438 0.313,0.198 10 false *b 2.521,4.01 3.135,4.208 0.615,0.198 10 false LSSR 2.281,4.354 2.448,4.552 0.167,0.198 10 false E 0.781,3.698 0.938,3.896 0.156,0.198 10 false E 0.542,4.354 1.156,4.552 0.615,0.198 10 false DLSR
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the door unlock detection switch and double lock position switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Lock 10 kΩ or higher
7 (LSSR) - 8 (E) Unlock Below 1 Ω
9 (DLSR) - 10 (E) Unset 10 kΩ or higher
9 (DLSR) - 10 (E) Set Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



c.
B532300C01
2.177,3.844 2.542,3.844 true 1.969,3.917 1.969,4.302 1.969,4.302 2.25,4.302 true 1.635,3.927 1.635,4.313 1.635,4.313 1.427,4.313 true 0.385,1.438 0.698,1.635 0.313,0.198 10 false *a 0.167,0.99 0.479,1.188 0.313,0.198 10 false *b 0.365,0.51 0.677,0.708 0.313,0.198 10 false *c 1.302,4.229 1.458,4.427 0.156,0.198 10 false E 2.594,3.771 2.844,4.021 0.25,0.25 10 false UL 0.885,2.74 1.198,2.938 0.313,0.198 10 false *d 2.302,4.208 2.552,4.458 0.25,0.25 10 false L
*a Unlock
*b Neutral
*c Lock
*d Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the door key lock and unlock switch (for RHD).

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (L) - 8 (E) Lock Below 1 Ω
6 (L) - 8 (E)
5 (UL) - 8 (E)
Neutral 10 kΩ or higher
5 (UL) - 8 (E) Unlock Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.