Use the same procedure for the RH and LH sides.
The procedure below is for the LH side.
68960
1.DISPOSE OF BACK DOOR STAY ASSEMBLY LH
Fully extend the back door stay assembly LH.
Secure the back door stay assembly LH horizontally in a vise with the piston rod pulled out.
Wearing protective glass, gradually cut the shaded part between "A" and "B" shown the illustration using a metal saw to gradually release the gas.
| Area | Measurement |
|---|---|
| A - B | 110.2 mm (4.339 in.) |
Always use proper safety equipment and be careful when drilling because shards of metal way fly about.
The gas is colorless, odorless and non-poisonous.