85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)
| *a | Ceramic Notch |
for LH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
Check the automatic stop (park) position.
After the windshield wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The windshield wiper motor assembly stops at the position shown in the illustration.
| *a | Ceramic Notch |
for RH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
Check the automatic stop (park) position.
After the windshield wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The windshield wiper motor assembly stops at the position shown in the illustration.
85110
2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)
| *a | Ceramic Notch |
for LH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
Check the automatic stop (park) position.
After the windshield wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The windshield wiper motor assembly stops at the position shown in the illustration.
| *a | Ceramic Notch |
for RH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
Check the automatic stop (park) position.
After the windshield wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Measurement |
|---|---|
| A | 10 mm (0.394 in.) |
The windshield wiper motor assembly stops at the position shown in the illustration.