Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM3620E _59 Vehicle Exterior _076564 WIPER / WASHER _0377479 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Make sure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
E132856C29
2.073,1.042 2.635,1.042 true 1.865,1.458 1.865,1.75 true 1.479,1.406 0.865,1.406 true 0.74,1.344 1.052,1.573 0.313,0.229 10 false E 2.677,0.979 2.896,1.188 0.219,0.208 10 false +1 1.781,1.771 2.125,1.979 0.344,0.208 10 false +2 0.156,0.177 0.469,0.375 0.313,0.198 10 false *a
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Auxiliary Battery Connection Specified Condition
Auxiliary battery positive (+) → Terminal 1 (+1)
Auxiliary battery negative (-) → Terminal 5 (E)
Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Auxiliary Battery Connection Specified Condition
Auxiliary battery positive (+) → Terminal 4 (+2)
Auxiliary battery negative (-) → Terminal 5 (E)
Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
E132856C31
1.083,1.833 1.49,1.417 true 1.917,1.427 2.344,1.833 true 1.333,1 0.917,0.75 true 0.083,0.063 0.396,0.26 0.313,0.198 10 false *a 0.979,1.844 1.292,2.042 0.313,0.198 10 false +1 2.354,1.844 2.51,2.042 0.156,0.198 10 false E 0.729,0.646 0.969,0.833 0.24,0.188 10 false +2
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Auxiliary Battery Connection Specified Condition
Auxiliary battery positive (+) → Terminal 5 (+1)
Auxiliary battery negative (-) → Terminal 4 (E)
Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply auxiliary battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Auxiliary Battery Connection Specified Condition
Auxiliary battery positive (+) → Terminal 3 (+2)
Auxiliary battery negative (-) → Terminal 4 (E)
Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.