85345R
1.REMOVE REAR WASHER NOZZLE
85345R
2.ADJUST REAR WASHER NOZZLE
Using a thin-bladed screwdriver, adjust the nozzle jet of the rear washer nozzle so that the contact area is within the standard.
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ON-VEHICLE INSPECTION
Do not use a safety pin or other pointed tools. Doing so may damage the inside of the rear washer nozzle sub-assembly.
Use a thin-bladed screwdriver with a tip approximately 1 mm (0.0394 in.) thick.
85345R
3.INSTALL REAR WASHER NOZZLE