Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM3620E _58 Vehicle Interior _076406 SEAT BELT _0377518 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71511S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.

Check the resistance.

i.
B378697C29
0.177,0.156 0.49,0.313 0.313,0.156 10 false *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the separate type front seat cushion pad (occupant detection sensor).

1 - 3 Front passenger side seat occupied Below 100 Ω
1 - 3 Front passenger side seat not occupied 1 MΩ or higher