76824
1.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR LH
When removing the back door garnish moulding protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the back door garnish moulding protector LH and back door outside garnish sub-assembly using a heat light.
Use the same procedure to remove the back door garnish moulding protector LH on the other side.
| Item | Temperature |
|---|---|
| Back Door Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Garnish Moulding Protector LH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door outside garnish sub-assembly and back door garnish moulding protector LH excessively.
Remove the back door garnish moulding protector LH.
76823
2.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR RH
When removing the back door garnish moulding protector RH, if the double-sided tape is difficult to remove, heat the adhesive of the back door garnish moulding protector RH and back door outside garnish sub-assembly using a heat light.
| Item | Temperature |
|---|---|
| Back Door Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Garnish Moulding Protector RH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door outside garnish sub-assembly and back door garnish moulding protector RH excessively.
Remove the 3 back door garnish moulding protectors RH.
75741E
3.REMOVE SYMBOL EMBLEM