76821
1.REMOVE BACK DOOR UPPER GARNISH MOULDING PROTECTOR
When removing the back door upper garnish moulding protector, if the double-sided tape is difficult to remove, heat the adhesive of the back door upper garnish moulding protector and back door lower outside garnish sub-assembly using a heat light.
| Item | Temperature |
|---|---|
| Back Door Lower Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Upper Garnish Moulding Protector | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door lower outside garnish sub-assembly and back door upper garnish moulding protector excessively.
Remove the back door upper garnish moulding protector.
76881B
2.REMOVE BACK DOOR LOWER MOULDING PROTECTOR RH
When removing the back door lower moulding protector RH, if the double-sided tape is difficult to remove, heat the adhesive of the back door lower moulding protector RH and back door lower outside garnish sub-assembly using a heat light.
Use the same procedure to remove the back door lower moulding protector RH on the other side.
| Item | Temperature |
|---|---|
| Back Door Lower Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Lower Moulding Protector RH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door lower outside garnish sub-assembly and back door lower moulding protector RH excessively.
Remove the back door lower moulding protector RH.
76822A
3.REMOVE BACK DOOR LOWER GARNISH MOULDING PROTECTOR
When removing the back door lower garnish moulding protector, if the double-sided tape is difficult to remove, heat the adhesive of the back door lower garnish moulding protector and back door lower outside garnish sub-assembly using a heat light.
Use the same procedure to remove the back door lower garnish moulding protector on the other side.
| Item | Temperature |
|---|---|
| Back Door Lower Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Lower Garnish Moulding Protector | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door lower outside garnish sub-assembly and back door lower garnish moulding protector excessively.
Remove the back door lower garnish moulding protector.
76882B
4.REMOVE BACK DOOR LOWER MOULDING PROTECTOR LH
When removing the back door lower moulding protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the back door lower moulding protector LH and back door lower outside garnish sub-assembly using a heat light.
Use the same procedure to remove the back door lower moulding protector LH on the other side.
| Item | Temperature |
|---|---|
| Back Door Lower Outside Garnish Sub-assembly | 20 to 30°C (68 to 86°F) |
| Back Door Lower Moulding Protector LH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door lower outside garnish sub-assembly and back door lower moulding protector LH excessively.
Remove the back door lower moulding protector LH.