Home › Drivetrain › EG62F (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT AND SELECT LEVER SHAFT
RM3620E _52 Drivetrain _076271 EG62F MANUAL TRANSMISSION / TRANSAXLE _0377959 SHIFT AND SELECT LEVER SHAFT A

EG62F MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  REASSEMBLY  


PROCEDURE

Hide 33252A 1.INSTALL INNER NO. 2 SHIFT LEVER

a.

Coat the inner No. 2 shift lever with gear oil.


b.
C400503C01
0.885,0.927 1.438,0.656 true 0.854,1.99 0.854,1.229 true 1.594,2.563 1.854,2.438 true 1.469,0.531 1.781,0.688 0.313,0.156 10 false *a 0.813,2 1.125,2.156 0.313,0.156 10 false *b 1.885,2.333 2.198,2.51 0.313,0.177 10 false *c
*a Lever
*b Slot
*c Mark


Insert the lever of the inner No. 2 shift lever into the slot of the shift inter lock plate and temporarily install them to the shift and select lever shaft.

NOTICE:

Make sure to temporarily install the inner No. 2 shift lever and shift inter lock plate with the mark on the tip of the shift and select lever shaft facing upward as shown in the illustration.



c.
C400504C01
3.063,0.271 3.375,0.427 0.313,0.156 10 false *a
*a Depth


Using a 5 mm pin punch and a hammer, install the inner No. 2 shift lever to the shift and select lever shaft with the inner No. 2 shift lever slotted spring pin.

Standard Depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)