Home › Vehicle Exterior › MIRROR (EXT) › RELAY
RM3620E _59 Vehicle Exterior _076403 MIRROR (EXT) _0378178 RELAY G

MIRROR (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 87989 1.INSPECT MIR MTR NO. 1(MIRROR CONTROL RELAY)

a.
B513841N03
2.75,1.417 2.75,1.25 2.75,1.25 2.833,1.25 false 2.49,1.427 2.49,1.26 2.49,1.26 2.573,1.26 false 2.24,1.438 2.24,1.271 2.24,1.271 2.323,1.271 false 2.417,0.865 2.667,0.865 2.667,0.865 2.667,0.948 false 2.406,0.448 2.656,0.448 2.656,0.448 2.656,0.531 false 2.729,1.448 2.885,1.646 0.156,0.198 10 false 1 2.458,1.458 2.615,1.656 0.156,0.198 10 false 4 2.208,1.458 2.365,1.656 0.156,0.198 10 false 2 2.323,0.813 2.479,1.01 0.156,0.198 10 false 5 2.313,0.385 2.469,0.583 0.156,0.198 10 false 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the MIR MTR No. 1 relay.


Hide 87989 2.INSPECT MIR MTR NO. 2(MIRROR CONTROL RELAY)

a.
B513841N04
2.75,1.417 2.75,1.25 2.75,1.25 2.833,1.25 false 2.49,1.427 2.49,1.26 2.49,1.26 2.573,1.26 false 2.24,1.438 2.24,1.271 2.24,1.271 2.323,1.271 false 2.417,0.865 2.667,0.865 2.667,0.865 2.667,0.948 false 2.406,0.448 2.656,0.448 2.656,0.448 2.656,0.531 false 2.729,1.448 2.885,1.646 0.156,0.198 10 false 1 2.458,1.458 2.615,1.656 0.156,0.198 10 false 4 2.208,1.458 2.365,1.656 0.156,0.198 10 false 2 2.323,0.813 2.479,1.01 0.156,0.198 10 false 5 2.313,0.385 2.469,0.583 0.156,0.198 10 false 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the MIR MTR No. 2 relay.