Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM (w/o Occupant Classification System)
RM3620E _58 Vehicle Interior _076406 SEAT BELT _0374978 SEAT BELT WARNING SYSTEM(w/o Occupant Classification System) U

SEAT BELT  SEAT BELT WARNING SYSTEM(w/o Occupant Classification System)  DATA LIST / ACTIVE TEST  


DATA LIST


NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Combination Meter or Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Passenger Buckle Switch Front passenger seat belt buckle switch signal OFF or ON OFF: Front passenger seat belt fastened
ON: Front passenger seat belt not fastened
-
Passenger Occupant Detection Switch Occupant detection sensor signal OFF or ON OFF: Front passenger seat not occupied
ON: Front passenger seat occupied
-
Rear Right Seat Buckle / Occupant Detection Warning Switch Rear seat inner belt buckle signal OFF or ON
w/o Rear Seat Occupant Detection Sensor

OFF: Rear RH seat belt fastened

ON: Rear RH seat belt not fastened


w/ Rear Seat Occupant Detection Sensor

OFF: Rear RH seat belt fastened and occupied

ON: Rear RH seat belt not fastened and occupied


w/ Rear Seat Belt Warning System
Rear Left Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for LH) buckle signal OFF or ON
w/o Rear Seat Occupant Detection Sensor

OFF: Rear LH seat belt (for LH) fastened

ON: Rear LH seat belt (for LH) not fastened


w/ Rear Seat Occupant Detection Sensor

OFF: Rear LH seat belt (for LH) fastened and occupied

ON: Rear LH seat belt (for LH) not fastened and occupied


w/ Rear Seat Belt Warning System
Rear Center Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for Center) buckle signal OFF or ON
w/o Rear Seat Occupant Detection Sensor

OFF: Rear LH seat belt (for Center) fastened

ON: Rear LH seat belt (for Center) not fastened


w/ Rear Seat Occupant Detection Sensor

OFF: Rear LH seat belt (for Center) fastened and occupied

ON: Rear LH seat belt (for Center) not fastened and occupied


w/ Rear Seat Belt Warning System
Driver Seatbelt Warning Buzzer Function Driver seat belt warning buzzer OFF or ON Customized setting displayed -
Passenger Seatbelt Warning Buzzer Function Front passenger seat belt warning buzzer OFF or ON Customized setting displayed -
Rear Right Seatbelt Warning Buzzer Function Rear RH seat belt warning buzzer OFF or ON Customized setting displayed w/ Rear Seat Belt Warning System
Rear Left Seatbelt Warning Buzzer Function Rear LH seat belt warning buzzer OFF or ON Customized setting displayed w/ Rear Seat Belt Warning System
Rear Center Seatbelt Warning Buzzer Function Rear center seat belt warning buzzer OFF or ON Customized setting displayed w/ Rear Seat Belt Warning System
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
RR Door Courtesy SW Rear door courtesy light switch RH signal OFF or ON OFF: Rear door RH closed
ON: Rear door RH open
w/o Rear Seat Occupant Detection Sensor
RL Door Courtesy SW Rear door courtesy light switch LH signal OFF or ON OFF: Rear door LH closed
ON: Rear door LH open
w/o Rear Seat Occupant Detection Sensor
D Seat Buckle SW Driver seat buckle switch signal OFF or ON OFF: Driver seat belt fastened
ON: Driver seat belt unfastened
-


ACTIVE TEST


HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Combination Meter / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Buzzer Operation (800Hz, Vol L, W/ Damping) Combination meter buzzer
·

Frequency: 800Hz

·

Volume: Large

·

Fading tone


ON -
Buzzer Operation (800Hz, Vol L, W/O Damping) Combination meter buzzer
·

Frequency: 800Hz

·

Volume: Large

·

Continuous tone


ON -
Buzzer Operation (800Hz, Vol S, W/ Damping) Combination meter buzzer
·

Frequency: 800Hz

·

Volume: Small

·

Fading tone


ON -
Buzzer Operation (800Hz, Vol S, W/O Damping) Combination meter buzzer
·

Frequency: 800Hz

·

Volume: Small

·

Continuous tone


ON -
Driver Side Seat Belt Warning Driver side seat belt warning light OFF/ON -
Passenger Side Seat Belt Warning Front passenger side seat belt warning light OFF/ON Not applicable to this vehicle