Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR (for 4WD/AWD)
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0378282 REAR SPEED SENSOR(for 4WD/AWD) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(for 4WD/AWD)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 89544E 2.REMOVE REAR SKID CONTROL SENSOR LH

a.
C408204C01
1.833,1 2.083,1.25 2.083,1.25 2.333,1.25 true 2.375,1.188 2.708,1.438 0.333,0.25 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disconnect the rear speed sensor connector from the rear skid control sensor LH.

NOTICE:
·

Remove any dirt or foreign matter on and around the rear speed sensor connector before performing this step.

·

Be careful not to damage the rear speed sensor or connector cover.




b.
C408205

Remove the bolt and rear skid control sensor LH from the rear axle carrier sub-assembly.

NOTICE:
·

Keep the tip of the rear skid control sensor LH and installation hole free of foreign matter.

·

Do not rotate or apply excessive force to the rear skid control sensor LH when removing it from the rear axle carrier sub-assembly. Rotating or applying excessive force may result in damage to the rear speed sensor.