| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 2 (L_OFF) - 12 (EL) | Light control switch off | Below 1 Ω |
| 10 (A) - 12 (EL) | Light control switch AUTO position | Below 1 Ω | |
| 14 (T) - 12 (EL) | Light control switch TAIL position | Below 1 Ω | |
| 5 (H) - 12 (EL) | Light control switch HEAD position | Below 1 Ω | |
| 6 (HF) - 12 (EL) | Headlight dimmer switch flash position | Below 1 Ω | |
| 1 (HU) - 12 (EL) | Headlight dimmer switch high position | Below 1 Ω | |
| 9 (TR) - 12 (EL) | Turn signal switch neutral position | 10 kΩ or higher | |
| 3 (TL) - 12 (EL) | |||
| 9 (TR) - 12 (EL) | Turn signal switch right turn position
(self cancel condition) |
Below 1 Ω | |
| 9 (TR) - 12 (EL) | Turn signal switch right turn position
(cancel ratchet operation condition) |
Below 1 Ω | |
| 9 (TR) - 11 (CR) | |||
| 11 (CR) - 12 (EL) | |||
| 3 (TL) - 12 (EL) | Turn signal switch left turn position
(self cancel condition) |
Below 1 Ω | |
| 3 (TL) - 12 (EL) | Turn signal switch in left turn position
(cancel ratchet operation condition) |
Below 1 Ω | |
| 3 (TL) - 11 (CR) | |||
| 11 (CR) - 12 (EL) | |||
| 4 (BFG) - 12 (EL) | Front fog light switch off | 10 kΩ or higher | |
| Front fog light switch on | Below 1 Ω | ||
| 13 (B) - 12 (EL) | Rear fog light switch off | 10 kΩ or higher | |
| Rear fog light switch on | Below 1 Ω |
The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 6.3°).
The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch operation is 10.5°).
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 15 (L_OFF) - 5 (EL) | Light control switch off | Below 1 Ω |
| 7 (A) - 5 (EL) | Light control switch AUTO position | Below 1 Ω | |
| 3 (T) - 5 (EL) | Light control switch TAIL position | Below 1 Ω | |
| 12 (H) - 5 (EL) | Light control switch HEAD position | Below 1 Ω | |
| 11 (HF) - 5 (EL) | Headlight dimmer switch flash position | Below 1 Ω | |
| 16 (HU) - 5 (EL) | Headlight dimmer switch high position | Below 1 Ω | |
| 8 (TR) - 5 (EL) | Turn signal switch neutral position | 10 kΩ or higher | |
| 14 (TL) - 5 (EL) | |||
| 8 (TR) - 5 (EL) | Turn signal switch right turn position
(self cancel condition) |
Below 1 Ω | |
| 8 (TR) - 5 (EL) | Turn signal switch right turn position
(cancel ratchet operation condition) |
Below 1 Ω | |
| 8 (TR) - 6 (CR) | |||
| 6 (CR) - 5 (EL) | |||
| 14 (TL) - 5 (EL) | Turn signal switch left turn position
(self cancel condition) |
Below 1 Ω | |
| 14 (TL) - 5 (EL) | Turn signal switch in left turn position
(cancel ratchet operation condition) |
Below 1 Ω | |
| 14 (TL) - 6 (CR) | |||
| 6 (CR) - 5 (EL) | |||
| 13 (BFG) - 5 (EL) | Front fog light switch off | 10 kΩ or higher | |
| Front fog light switch on | Below 1 Ω | ||
| 4 (B) - 5 (EL) | Rear fog light switch off | 10 kΩ or higher | |
| Rear fog light switch on | Below 1 Ω |
The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 6.3°).
The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch operation is 10.5°).
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | C-2 - A-2 | Always | Below 1 Ω |
| C-3 - A-14 | |||
| C-4 - A-5 | |||
| C-5 - A-10 | |||
| C-6 - A-1 | |||
| C-7 - A-6 | |||
| C-11 - A-4 | |||
| C-12 - A-13 | |||
| C-13 - A-12 | |||
| C-8 - A-9 | |||
| C-9 - A-3 | |||
| C-10 - A-11 | |||
| C-13 - A-12 | |||
| C-24 - B-10 | |||
| C-25 - B-13 | |||
| C-26 - B-11 | |||
| C-27 - B-12 | |||
| C-28 - B-14 | |||
| C-29 - B-7 | |||
| C-30 - B-6 | |||
| C-31 - B-15 | |||
| C-32 - B-9 | |||
| C-33 - B-5 | |||
| C-34 - B-4 |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | C-2 - B-15 | Always | Below 1 Ω |
| C-3 - B-3 | |||
| C-4 - B-12 | |||
| C-5 - B-7 | |||
| C-6 - B-16 | |||
| C-7 - B-11 | |||
| C-11 - B-13 | |||
| C-12 - B-4 | |||
| C-13 - B-5 | |||
| C-8 - B-8 | |||
| C-9 - B-14 | |||
| C-10 - B-6 | |||
| C-13 - B-5 | |||
| C-24 - A-15 | |||
| C-25 - A-12 | |||
| C-26 - A-14 | |||
| C-27 - A-13 | |||
| C-28 - A-11 | |||
| C-29 - A-2 | |||
| C-30 - A-3 | |||
| C-31 - A-10 | |||
| C-32 - A-16 | |||
| C-33 - A-4 | |||
| C-34 - A-5 |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 5 (TB) - 2 (E) | Hazard warning signal switch off | 10 kΩ or higher |
| Hazard warning signal switch on | Below 1 Ω |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 5 (B) - 2 (E) | Automatic high beam main switch off | 10 kΩ or higher |
| Automatic high beam main switch on | Below 1 Ω |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component with harness connected | A40-1 (OUT) - A40-2 (GND) | Brake pedal released | 1.5 V or less |
| A40-1 (OUT) - A40-2 (GND) | Brake pedal depressed | 11 to 14 V | |
| A40-3 (L) - A40-2 (GND) | Brake pedal released | 1.5 V or less | |
| A40-3 (L) - A40-2 (GND) | Brake pedal depressed | 11 to 14 V | |
| A40-4 (ACC) - A40-2 (GND) | Always | 11 to 14 V | |
| A40-5 (L) - A40-2 (GND) | Ignition switch on (IG), brake pedal released | 7.5 to 14 V | |
| A40-5 (L) - A40-2 (GND) | Ignition switch on (IG), brake pedal depressed | 0 to 1.5 V |
| Connector Condition | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| Component with harness connected | H1-4 (CLTS) - H1-2 (CLTE) | Ignition switch on (IG), light control switch in AUTO position | Correct waveform is as shown |
The communication waveform changes according to the surrounding brightness.
| Connector Condition | Tester Connection | Condition | Specified Condition | |
|---|---|---|---|---|
| Component without harness connected | 1 (SHG) - 2 (SHRR) | Link moves upward from standard position to bound side (Height low) | From 38.8° to bound side link stop position | Approx. 0.5 V |
| 38.8° (Full Bound) | Approx. 0.7 V | |||
| Standard position | - | Approx. 2.25 V | ||
| Link moves downward from standard position to rebound side (Height high) | Horizontal Position | Approx. 2.47 V | ||
| 64.4° (Full Rebound) | Approx. 4.5 V | |||
| From 64.4° to rebound side link stop position | Approx. 4.5 V | |||
| Connector Condition | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| - | 3 - 5 | Auxiliary battery voltage is not applied to terminals 1 and 2 | 10 kΩ or higher |
| Auxiliary battery voltage is applied to terminals 1 and 2 | Below 1 Ω |
| Connector Condition | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| - | 3 - 5 | Auxiliary battery voltage is not applied to terminals 1 and 2 | 10 kΩ or higher |
| Auxiliary battery voltage is applied to terminals 1 and 2 | Below 1 Ω |
| Connector Condition | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| - | 3 - 5 | Auxiliary battery voltage is not applied to terminals 1 and 2 | 10 kΩ or higher |
| Auxiliary battery voltage is applied to terminals 1 and 2 | Below 1 Ω |