SEAT BELT WARNING SYSTEM DESCRIPTION
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.
Seat belt warning light operation for front passenger seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.
Rear seat belt warning light:
The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the rear door state, vehicle speed and rear seat belt state.
Front seat belt warning buzzer:
After turning the engine switch on (IG), if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at 1.2-seconds intervals for 6 seconds. (Buzzer Regulated by Law)
When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 90 seconds.
Rear seat belt warning buzzer:
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 30 seconds.
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (for Driver Side) | Informs the airbag sensor assembly of the driver seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (for Front Passenger Side) | Informs the occupant detection ECU of the front passenger seat belt condition (fastened or unfastened). |
·
Front occupant classification sensor LH ·
Rear occupant classification sensor LH |
Informs the occupant detection ECU of the front passenger seat condition (occupied or unoccupied). |
| Combination meter assembly | ·
Illuminates, blinks or turns off the seat belt warning light. ·
Illuminates or turns off the rear seat belt warning light. ·
Sounds the seat belt warning buzzer. |
| Occupant detection ECU | Sends the front passenger seat belt buckle switch signal and occupant detection signal to the airbag ECU assembly via CAN communication. |
| Airbag sensor assembly | Sends the driver seat belt buckle switch signal to the combination meter assembly via CAN communication. |
·
Rear seat inner belt assembly ·
Rear seat inner with center belt assembly LH |
Informs the combination meter assembly of each rear seat belt condition (fastened or unfastened). |
| Rear door courtesy light switch assembly (LH/RH) | Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed). |
| Main body ECU (multiplex network body ECU) | Sends the driver seat belt buckle switch signal to the combination meter assembly via CAN communication. |
·
Brake actuator assembly (skid control ECU) (for Gasoline Model) ·
Brake booster with master cylinder assembly (skid control ECU) (for HV Model) |
Sends the vehicle speed signal to the combination meter assembly via CAN communication. |
·
ECM (for Gasoline Model) ·
Hybrid vehicle control ECU (for HV Model) |
Sends the shift position signal to the combination meter assembly via CAN communication. |