CUSTOMIZE PARKING SUPPORT BRAKE SYSTEM
Customizing with the GTS.
Connect the GTS to the DLC3 and turn the engine switch on (IG).
Enter the following menus: Customize / Clearance Warning.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| PKSB (O) Function | Parking support brake (static objects) function setting | ON | $00:ON,$01:OFF | Clearance warning ECU assembly |
| PKSB (O) Target Stopping Distance | Stop distance status of parking support brake (static objects) function | Far | $00:Close,$01:Far | Clearance warning ECU assembly |
| PKSB Switch State Stored | Setting of the parking support brake system main switch status memory | Stored | $00:Stored,$01:Not Stored | Clearance warning ECU assembly |
| PKSB (V) Function | Parking support brake (rear crossing vehicles) function setting | ON | $00:ON,$01:OFF | Clearance warning ECU assembly |
| PKSB (V) Operation Timing Setting | Displays the operation timing setting of the parking support brake (rear crossing vehicles) function | Standard | $00:Late,$01:Standard | Clearance warning ECU assembly |
| PKSB (V) Sensitivity | Displays the sensitivity setting of the parking support brake (rear crossing vehicles) function | Standard | $00:Standard,$01:Low | Clearance warning ECU assembly |