PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
PRECAUTION
The iMT system may not detect a gear change after a certain amount of time has elapsed between the clutch operation and shift lever operation or when the shift lever is operated after coasting with the shift lever in neutral.
The speed synchronization operation can be performed for a certain amount of time by operating the shift lever after the clutch pedal is depressed. After a certain amount of time elapses with the clutch pedal depressed, it must be released and depressed again before the speed synchronization operation can be performed again.
The iMT system may not operate if the clutch pedal is not completely released or fully depressed.
If shift lever operation and clutch engagement are performed in quick succession, the speed synchronization operation of the iMT system may not be performed.
If the engine control system or brake control system malfunctions, the iMT system may stop operating.