Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0372178 MANUAL TRANSAXLE SYSTEM D

EG62 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

To check for DTCs, connect the GTS to the Data Link Connector 3 (DLC3) of the vehicle.

The GTS displays DTCs, the freeze frame data and a variety of engine data.

The DTCs and freeze frame data can be cleared using the GTS.

Click hereDrivetrain>EG62 (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSAXLE SYSTEM>DTC CHECK / CLEAR



FUNCTION OF WARNING INDICATOR


a.

If the iMT system is not functioning properly, the driver is warned by the iMT warning light in the combination meter assembly.

DTC iMT Indicator
(iMT System ON)
Detail
DTCs are stored iMT warning light (yellow) illuminates iMT system malfunction
DTCs are not stored iMT indicator light (green) illuminates iMT system standby condition



FREEZE FRAME DATA


a.

The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not and whether the air-fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.



CHECK DATA LINK CONNECTOR 3 (DLC3)




CHECK BATTERY VOLTAGE


a.

Check the battery voltage.

Standard voltage:

11 to 14 V