CHECK PARKING BRAKE ECU ASSEMBLY
| *a | Front view of wire harness connector
(to Parking Brake ECU Assembly) |
- | - |
Disconnect the parking brake ECU assembly connectors.
Measure the voltage and resistance according to the values in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| M36-7 (+B) - Body ground | W | Parking brake motor RH (Parking brake actuator assembly RH) power supply | Always | 11 to 14 V |
| M36-9 (GND1) - Body ground | W-B | Ground | Always | Below 1 Ω |
| M36-12 (+B2) - Body ground | LG | Parking brake motor LH (Parking brake actuator assembly LH) power supply | Always | 11 to 14 V |
| M35-3 (BECU) - Body ground | L | Parking brake ECU assembly power supply | Always | 11 to 14 V |
| M35-5 (IG) - Body ground | W | IG power supply | Power switch on (IG) | 11 to 14 V |
Connect the parking brake ECU assembly connectors.
| *a | Component with harness connected
(Parking Brake ECU Assembly) |
- | - |
Measure the voltage according to the values in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| M36-1 (MRR+) - Body ground | SB | Parking brake motor RH (Parking brake actuator assembly RH) (+) | ·
Power switch on (IG) ·
Parking brake not operating |
3.9 to 6.2 V |
| M36-3 (MRR-) - Body ground | G | Parking brake motor RH (Parking brake actuator assembly RH) (-) | ·
Power switch on (IG) ·
Parking brake not operating |
3.9 to 6.2 V |
| M36-4 (MRL+) - Body ground | B | Parking brake motor LH (Parking brake actuator assembly LH) (+) | ·
Power switch on (IG) ·
Parking brake not operating |
3.9 to 6.2 V |
| M36-6 (MRL-) - Body ground | R | Parking brake motor LH (Parking brake actuator assembly LH) (-) | ·
Power switch on (IG) ·
Parking brake not operating |
3.9 to 6.2 V |
| M35-14 (POL) - Body ground | L | Electric parking brake switch indicator light | ·
Power switch on (IG) ·
Electric parking brake switch indicator light off |
9 to 14 V |
| M35-15 (LCK2) - Body ground | GR | Electric parking brake switch (integration control and panel assembly) lock 2 | ·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) off (released) |
6.5 to 10 V |
·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) pulled and held to lock side |
2.8 to 5 V | |||
| M35-16 (REL2) - Body ground | LG | Electric parking brake switch (integration control and panel assembly) release 2 | ·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) off (released) |
6.5 to 10 V |
·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) pushed and held to release side |
2.8 to 5 V | |||
| M35-19 (REL1) - Body ground | L | Electric parking brake switch (integration control and panel assembly) release 1 | ·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) off (released) |
6.5 to 10 V |
·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) pushed and held to release side |
2.8 to 5 V | |||
| M35-20 (LCK1) - Body ground | B | Electric parking brake switch (integration control and panel assembly) lock 1 | ·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) off (released) |
1.8 to 3.3 V |
·
Power switch on (IG) ·
Electric parking brake switch (integration control and panel assembly) pulled and held to lock side |
2.2 to 3.7 V |