Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM (w/o Vacuum Brake Booster)
RM3620E _54 Brake _076413 PARKING BRAKE _0379234 ELECTRIC PARKING BRAKE SYSTEM(w/o Vacuum Brake Booster) C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM(w/o Vacuum Brake Booster)  C13A0  Open circuit in Power source circuit  C13A5  Electric Current of Motor  C13B0  Electric Parking Brake ECU Malfunction  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13A0 Open circuit in Power source circuit Both of following conditions are met:
1.

Power switch on (IG) or electric parking brake switch (integration control and panel assembly) pulled to lock side with power switch off.

2.

Parking brake ECU assembly's power source relay is open for approximately 0.5 seconds.


·

Parking brake actuator assembly

·

Parking brake ECU assembly


Yes An electric parking brake system malfunction is displayed on the multi-information display.
C13A5 Electric Current of Motor One of the following conditions are met:
Detection conditions (1)
1.

Power switch on (IG) or electric parking brake switch (integration control and panel assembly) pulled to lock side with power switch off.

2.

Parking brake ECU assembly's internal current is abnormal for approximately 0.1 to 0.5 seconds (differs according to malfunction contents).


Detection conditions (2)

When current zero point calibration is not completed within 3 seconds after turning the power switch on (IG)


·

Parking brake actuator assembly

·

Parking brake ECU assembly


Yes An electric parking brake system malfunction is displayed on the multi-information display.
C13B0 Electric Parking Brake ECU Malfunction Both of following conditions are met:
1.

Power switch on (IG) or electric parking brake switch (integration control and panel assembly) pulled to lock side with power switch off.

2.

Internal current of parking brake ECU assembly or ECU components abnormal for a maximum of 60 seconds (differs according to malfunction contents).


·

Parking brake actuator assembly

·

Parking brake ECU assembly


Yes An electric parking brake system malfunction is displayed on the multi-information display.

DTC Detection Condition Combination Table: C13A0
Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition Electric parking brake switch (integration control and panel assembly) is operated to lock side with power switch off ○ -
Power switch on (IG) - ○
Malfunction Status Open circuit in parking brake ECU assembly internal power source relay ○ ○
Detection Time Approximately 0.5 seconds Approximately 0.5 seconds
Trip Count 1 trip 1 trip

HINT:

If the conditions match either of these patterns, a DTC will be output.


DTC Detection Condition Combination Table: C13A5
Vehicle Condition
Pattern 1 Pattern 2 Pattern 3
Diagnosis Condition Electric parking brake switch (integration control and panel assembly) is operated to lock side with power switch off ○ - -
Power switch on (IG) - ○ -
When current zero point calibration is not completed - - ○
Malfunction Status Parking brake ECU assembly internal current value malfunction ○ ○ -
Detection Time Approximately 0.1 to 0.5 seconds (differs according to malfunction contents) Approximately 0.1 to 0.5 seconds (differs according to malfunction contents) Within 3 seconds after turning the power switch on (IG)
Trip Count 1 trip 1 trip 1 trip

HINT:

If the conditions match either of these patterns, a DTC will be output.


DTC Detection Condition Combination Table: C13B0
Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition Electric parking brake switch (integration control and panel assembly) is operated to lock side with power switch off ○ -
Power switch on (IG) - ○
Malfunction Status Parking brake ECU assembly internal voltage malfunction or EEPROM malfunction ○ ○
Detection Time Maximum of 60 seconds (differs according to malfunction contents) Maximum of 60 seconds (differs according to malfunction contents)
Trip Count 1 trip 1 trip

HINT:

If the conditions match either of these patterns, a DTC will be output.


CAUTION / NOTICE / HINT

NOTICE:

When replacing the parking brake ECU assembly, operate the electric parking brake switch (integration control and panel assembly) from the lock side to the release side, as the parking brake indicator light blinks when the power switch is first turned on (IG).


PROCEDURE

1.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
a.

Remove the parking brake actuator assembly.

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE ACTUATOR>REMOVAL


b.

Inspect the parking brake actuator assembly.

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE ACTUATOR>INSPECTION


Result:
Proceed to
OK
NG



OK

2.REPLACE PARKING BRAKE ECU ASSEMBLY

NG

REPLACE PARKING BRAKE ACTUATOR ASSEMBLY

2.REPLACE PARKING BRAKE ECU ASSEMBLY
a.

Replace parking brake ECU assembly.

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE ECU>REMOVAL

Result:
Proceed to
NEXT




NEXT

END