Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster)
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0379311 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ Vacuum Brake Booster) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ Vacuum Brake Booster)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage between 9.6 and 16.5 V, a steering sensor internal malfunction signal is received from the steering sensor. Steering sensor

PROCEDURE

1.REPLACE STEERING SENSOR

Result:
Proceed to
NEXT



NEXT

END