Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster)
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0379312 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o Vacuum Brake Booster) D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o Vacuum Brake Booster)  DTC CHECK / CLEAR  


DTC CHECK/CLEAR


a.

Check for DTCs.

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105



b.

Clear the DTCs.

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.


v.

Press the DTC clear button.

Chassis > ABS/VSC/TRC > Clear DTCs
50002 105



END OF DTC CHECK/CLEAR


a.

Turn the power switch on (IG).


b.

Check that the ABS warning, brake warning / yellow (minor malfunction), slip indicator and brake hold operated indicator* lights go off when the power switch is turned on (READY).

*: The brake hold switch (integration control and panel assembly) is turned on under the following vehicle conditions.

Vehicle Conditions:

(1)

The driver's door is closed.

(2)

Driver's seat belt is fastened.