CHECK FOR INTERMITTENT PROBLEMS
A momentary interruption (open circuit) in the connectors and/or wire harnesses between the sensors and ECUs can be detected using the Data List function of the GTS.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Follow the directions on the GTS to display the Data List and select areas where momentary interruptions should be monitored.
A momentary interruption (open circuit) cannot be detected for 3 seconds after the power switch is turned on (IG) (initial check).
If Error remains displayed for one of the items on the GTS, check for continuity between the ECU and the item for which Error is displayed.
If a momentary interruption occurs and Error is displayed on the GTS, Error will remain displayed on the GTS for 1 second after the circuit returns to normal.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Speed Open | Front speed sensor RH open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1464 |
| FL Speed Open | Front speed sensor LH open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1465 |
| RR Speed Open | Rear speed sensor RH open detection | Error or Normal | Normal: Momentary interruption not detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1466 |
| RL Speed Open | Rear speed sensor LH open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1467 |
| Yaw Rate Open | Yaw rate sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: U0123 |
| Deceleration Open | Acceleration sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: U0124 |
| Steering Open | Steering sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: U0126 |
| Master Cylinder Open | Regulator pressure sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1246 |
| Stroke Open | Brake pedal stroke sensor assembly open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1247 |
| FR Wheel Cylinder Open | Wheel cylinder pressure sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1364 |
| Accumulator Open | Accumulator pressure sensor open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: C1365 |
| HV Communication Open | Hybrid vehicle communication open detection | Error or Normal | Error: Hybrid vehicle control ECU assembly communication invalid state detected
Normal: Hybrid vehicle control ECU assembly communication invalid state not detected |
·
After hybrid vehicle control ECU assembly communication invalid state occurs, if there no further invalid state occurs, it switches from "Error" to "Normal". ·
Related DTC: U0293 |
| Air Bag ECU Communication Open | Airbag sensor assembly communication open detection | Error or Normal | Error: Momentary interruption detected
Normal: Momentary interruption not detected |
·
After a momentary interruption occurs, if there is no momentary interruption for 1 second, it switches from "Error" to "Normal". ·
Related DTC: U0151 |
While observing the screen, gently jiggle the connectors or wire harnesses between the ECUs and sensors, or between ECUs.
Normal is displayed.
If the display changes, this indicates that there has been a momentary interruption (open circuit) in the connector and/or wire harness. In this case, repair or replace the connectors and/or wire harnesses as one of them is faulty.