ECM
The standard voltage and resistance of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*: w/ Shift Paddle Switch |
||||
| A24-1 (BATT) - A24-10 (E1) | G - W-B | Battery (for measuring battery voltage and for ECM memory) | Always | 11 to 14 V |
| A24-8 (CANH) - A24-10 (E1) | B - W-B | CAN communication line | Ignition switch ON | Pulse generation |
| A24-9 (+B) - A24-10 (E1) | L - W-B | Power source of ECM | Ignition switch ON | 11 to 14 V |
| A24-10 (E1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| A24-12 (PWMS) - A24-10 (E1) | P - W-B | SPORT mode switch (integration control and panel assembly) signal | Ignition switch ON and SPORT mode switch (integration control and panel assembly) being pushed and held | Below 1.5 V |
| Ignition switch ON and SPORT mode switch (integration control and panel assembly) not pushed | 11 to 14 V | |||
| A24-13 (SPCN) - A24-10 (E1) | Y - W-B | NORMAL mode switch (integration control and panel assembly) signal | Ignition switch ON and NORMAL mode switch (integration control and panel assembly) being pushed and held | Below 1.5 V |
| Ignition switch ON and NORMAL mode switch (integration control and panel assembly) not pushed | 11 to 14 V | |||
| A24-14 (S) - A24-10 (E1) | GR - W-B | S shift position switch signal | Ignition switch ON and shift lever in S | 11 to 14 V |
| Ignition switch ON and shift lever not in S | Below 1 V | |||
| A24-18 (CANL) - A24-10 (E1) | W - W-B | CAN communication line | Ignition switch ON | Pulse generation |
| A24-19 (SFTD) - A24-10 (E1) | G - W-B | Down-shift switch signal | Ignition switch ON | 11 to 14 V |
| Ignition switch ON and shift lever held in "-" (Down shift) | Below 1 V | |||
| A24-19 (SFTD) - A24-28 (ECCS)* | G - BR | Down-shift switch signal | Ignition switch ON | 11 to 14 V |
| Ignition switch ON and "-" (Down shift) shift paddle switch operated | Below 1 V | |||
| A24-20 (SFTU) - A24-10 (E1) | W - W-B | Up-shift switch signal | Ignition switch ON | 11 to 14 V |
| Ignition switch ON and shift lever held in "+" (Up shift) | Below 1 V | |||
| A24-20 (SFTU) - A24-28 (ECCS)* | W - BR | Up-shift switch signal | Ignition switch ON | 11 to 14 V |
| Ignition switch ON and "+" (Up shift) shift paddle switch operated | Below 1 V | |||
| A24-21 (STP) - A24-10 (E1) | SB - W-B | Stop light switch signal | Brake pedal depressed | 7.5 to 14 V |
| Brake pedal released | Below 1 V | |||
| A24-23 (NSW) - A24-10 (E1) | LG - W-B | Park/neutral position switch signal | Ignition switch ON and shift lever in P or N | Below 1 V |
| Ignition switch ON and shift lever not in P or N | 11 to 14 V | |||
| A24-30 (STA) - A24-10 (E1) | G - W-B | Starter signal | Cranking | 6.0 V or higher |
| Ignition switch ON and shift lever in P or N | Below 2 V | |||
| A24-35 (+B2) - A24-10 (E1) | L - W-B | Power source of ECM | Ignition switch ON | 11 to 14 V |
| A24-42 (SPD) - A24-10 (E1) | V - W-B | Vehicle speed signal from combination meter assembly | Vehicle being driven | Pulse generation |
| C41-2 (SL6+) - C41-1 (SL6-) | B - L | Solenoid (SL6) valve signal | 1st or Reverse gear selected | Pulse generation |
| C41-4 (SL3+) - C41-3 (SL3-) | G - R | Solenoid (SL3) valve signal | 3rd, 7th or Reverse gear selected | Pulse generation |
| C41-6 (SL2+) - C41-5 (SL2-) | R - GR | Solenoid (SL2) valve signal | 5th, 6th, 7th or 8th gear selected | Pulse generation |
| C41-8 (SL1+) - C41-7 (SL1-) | LG - L | Solenoid (SL1) valve signal | 1st, 2nd, 3rd, 4th or 5th gear selected | Pulse generation |
| C41-10 (SLT+) - C41-9 (SLT-) | GR - LG | Solenoid (SLT) valve signal | Engine idling | Pulse generation |
| C41-12 (SLU+) - C41-11 (SLU-) | LG - V | Solenoid (SLU) valve signal | Lock-up ON | Pulse generation |
| C41-14 (SL5+) - C41-13 (SL5-) | V - P | Solenoid (SL5) valve signal | 2nd or 8th gear selected | Pulse generation |
| C41-16 (SL4+) - C41-15 (SL4-) | G - B | Solenoid (SL4) valve signal | 4th or 6th gear selected | Pulse generation |
| C41-19 (SL) - A24-10 (E1) | P - W-B | Solenoid (SL) valve signal | ·
Shift lever in P, R or N ·
Lock-up OFF (shift lever in D) |
11 to 14 V |
| C41-23 (D) - A24-10 (E1) | R - W-B | D shift position switch signal | Ignition switch ON and shift lever in D or S | 11 to 14 V |
| Ignition switch ON and shift lever not in D or S | Below 1 V | |||
| C41-24 (N) - A24-10 (E1) | LG - W-B | N shift position switch signal | Ignition switch ON and shift lever in N | 11 to 14 V |
| Ignition switch ON and shift lever not in N | Below 1 V | |||
| C41-25 (R) - A24-10 (E1) | W - W-B | R shift position switch signal | Ignition switch ON and shift lever in R | 11 to 14 V |
| Ignition switch ON and shift lever not in R | Below 1 V | |||
| C41-26 (P) - A24-10 (E1) | B - W-B | P shift position switch signal | Ignition switch ON and shift lever in P | 11 to 14 V |
| Ignition switch ON and shift lever not in P | Below 1 V | |||
| C41-33 (NCB) - A24-10 (E1) | B - W-B | Power source for sensor
(specific voltage) |
Ignition switch ON | 11 to 14 V |
| C41-34 (NCO) - A24-10 (E1) | V - W-B | Transmission Revolution Sensor (NC) signal | Vehicle being driven | Pulse generation |
| C41-35 (NTB) - A24-10 (E1) | R - W-B | Power source for sensor
(specific voltage) |
Ignition switch ON | 11 to 14 V |
| C41-36 (NTO) - A24-10 (E1) | G - W-B | Transmission Revolution Sensor (NT) signal | Engine idling (shift lever in P or N) | Pulse generation |
| C41-46 (THO1) - C41-45 (ETHO) | LG - L | ATF temperature sensor signal | ATF temperature 115°C (239°F) or higher | Below 1.5 V |