Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › 2018.10–2019.02
RM3620E _57 Power Source / Network _076016 NETWORKING _0369864 CAN COMMUNICATION SYSTEM(for HV Model) J

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  Check Bus 2 Lines for Short Circuit  


DESCRIPTION

There may be a short circuit between the CAN main bus lines and/or CAN branch lines when the resistance between terminals 18 (CA4H) and 17 (CA4L) of the central gateway ECU (network gateway ECU) is below 54 Ω.

Symptom Trouble Area

*: w/ Vehicle Proximity Notification System

Resistance between terminals 18 (CA4H) and 17 (CA4L) of the central gateway ECU (network gateway ECU) is below 54 Ω.
·

Short in CAN main bus wire

·

Short in CAN branch wire

·

Central gateway ECU (network gateway ECU)

·

ECM

·

Hybrid vehicle control ECU assembly

·

Inverter with converter assembly

·

Brake booster with master cylinder assembly (skid control ECU)

·

Vehicle approaching speaker controller*

·

No. 3 CAN junction connector



WIRING DIAGRAM

C405896E05
0.885,0.438 1.5,0.635 0.615,0.198 10 false CA1H 0.906,0.833 1.521,1.031 0.615,0.198 10 false CA1L 0.865,2.146 1.479,2.344 0.615,0.198 10 false CANH 0.885,2.531 1.5,2.729 0.615,0.198 10 false CANL 6.125,4.344 6.74,4.542 0.615,0.198 10 false CANL 6.115,3.802 6.729,4 0.615,0.198 10 false CANH 5.958,2.563 6.573,2.76 0.615,0.198 10 false CA2L 5.948,2.146 6.563,2.344 0.615,0.198 10 false CA2H 6.167,0.844 6.781,1.042 0.615,0.198 10 false CA4L 6.156,0.438 6.771,0.635 0.615,0.198 10 false CA4H 0.396,1.125 1.5,1.333 1.104,0.208 10 false A31*2, G64*3 0.375,2.844 0.99,3.042 0.615,0.198 10 false A51 4.969,2.781 5.583,2.979 0.615,0.198 10 false A42 5.24,1.073 5.854,1.271 0.615,0.198 10 false G72 5.854,4.563 6.469,4.76 0.615,0.198 10 false A24 2.896,4.604 3.51,4.802 0.615,0.198 10 false G103 0.396,1.333 2.104,1.677 1.708,0.344 10 false Hybrid Vehicle Control ECU Assembly 0.396,3.031 1.771,3.417 1.375,0.385 10 false Inverter with Converter Assembly 2.885,4.792 4.875,5.167 1.99,0.375 10 false No. 3 CAN Junction Connector 6.115,4.75 6.719,5 0.604,0.25 10 false ECM 4.979,2.969 7.156,3.375 2.177,0.406 10 false Brake Booster with Master Cylinder Assembly (Skid Control ECU) 5.219,1.25 7.156,1.625 1.938,0.375 10 false Central Gateway ECU (Network Gateway ECU) 1.375,0.333 1.99,0.531 0.615,0.198 10 false 21 1.396,0.729 2.01,0.927 0.615,0.198 10 false 8 1.365,2.063 1.979,2.26 0.615,0.198 10 false 1 1.375,2.438 1.99,2.635 0.615,0.198 10 false 7 4.104,3.771 4.719,3.969 0.615,0.198 10 false 3 4.083,4.177 4.698,4.375 0.615,0.198 10 false 13 3.073,4.156 3.688,4.354 0.615,0.198 10 false 18 4.115,2 4.729,2.198 0.615,0.198 10 false 7 4.094,0.729 4.708,0.927 0.615,0.198 10 false 11 4.104,0.333 4.719,0.531 0.615,0.198 10 false 1 3.198,0.354 3.406,0.563 0.208,0.208 10 false 5 3.146,0.74 3.76,0.938 0.615,0.198 10 false 15 3.188,2.021 3.417,2.219 0.229,0.198 10 false 4 3.125,2.448 3.74,2.646 0.615,0.198 10 false 14 5.792,3.771 6.406,3.969 0.615,0.198 10 false 8 5.719,4.167 6.333,4.365 0.615,0.198 10 false 18 5.708,2.458 6.323,2.656 0.615,0.198 10 false 34 5.708,2.063 6.323,2.26 0.615,0.198 10 false 35 5.719,0.76 6.333,0.958 0.615,0.198 10 false 17 5.708,0.354 6.323,0.552 0.615,0.198 10 false 18 0.417,4.563 1.031,4.76 0.615,0.198 10 false A45 0.875,3.844 1.49,4.042 0.615,0.198 10 false CANH 0.885,4.24 1.5,4.438 0.615,0.198 10 false CANL 1.375,3.76 1.99,3.958 0.615,0.198 10 false 3 1.375,4.156 1.99,4.354 0.615,0.198 10 false 4 0.417,4.781 1.75,5.188 1.333,0.406 10 false Vehicle Approaching Speaker Controller*1 0.208,5.354 3.323,5.615 3.115,0.26 10 false *1: w/ Vehicle Proximity Notification System 3.156,5.354 4.083,5.563 0.927,0.208 10 false *2: for LHD 4.135,5.354 5.063,5.563 0.927,0.208 10 false *3: for RHD 3.115,3.698 3.729,3.896 0.615,0.198 10 false 8 4.104,2.458 4.719,2.656 0.615,0.198 10 false 17

CAUTION / NOTICE / HINT

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.


NOTICE:
·

Because the order of diagnosis is important to allow correct diagnosis, make sure to begin troubleshooting using How to Proceed with Troubleshooting when CAN communication system related DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING

·

Before measuring the resistance of the CAN bus, turn the power switch off and leave the vehicle for 1 minute or more without operating the key or any switches, or opening or closing the doors. After that, disconnect the cable from the negative (-) auxiliary battery terminal and leave the vehicle for 1 minute or more before measuring the resistance.

·

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

Some parts must be initialized and set when replacing or removing and installing parts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

DTC check procedure: Turn the power switch on (IG) and wait for 1 minute or more. Then operate the suspected malfunctioning system and drive the vehicle at 60 km/h (37 mph) or more for 5 minutes or more.

·

After the repair, perform the CAN bus check and check that all the ECUs and sensors connected to the CAN communication system are displayed as normal.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM



HINT:
·

Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.

·

When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.



PROCEDURE

1.CHECK FOR SHORT IN CAN BUS WIRES (NO. 3 CAN JUNCTION CONNECTOR)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the No. 3 CAN junction connector.


c.

Measure the resistance according to the value(s) in the table below.

C387411C47
0.313,1.219 0.75,1.5 0.438,0.281 1.24,0.927 1.406,0.927 1.406,0.927 1.865,1.396 true 1.135,1.979 1.302,1.979 1.302,1.979 1.865,1.604 true 1.719,0.667 1.885,0.667 1.885,0.667 2.604,1.375 true 1.51,2.344 1.677,2.344 1.677,2.344 2.635,1.615 true 1.958,0.458 2.125,0.458 2.125,0.458 3,1.417 true 1.75,2.5 1.917,2.5 1.917,2.5 2.979,1.625 true 2,0.198 2.167,0.198 2.167,0.198 3.354,1.396 true 2.083,2.667 2.25,2.667 2.25,2.667 3.365,1.625 true 4.823,0.396 4.573,0.396 4.573,0.396 4.125,1.417 true 4.792,2.396 4.542,2.396 4.542,2.396 4.146,1.594 true 5.177,0.646 4.927,0.646 4.927,0.646 4.531,1.427 true 5.052,2.208 4.802,2.208 4.802,2.208 4.49,1.573 true 0.125,0.063 0.438,0.26 0.313,0.198 10 false *a 0.375,1.281 0.781,1.49 0.406,0.208 10 false G103 0.604,1.896 1.188,2.104 0.583,0.208 10 false CANL*b 0.677,0.854 1.26,1.063 0.583,0.208 10 false CANH*b 0.969,2.26 1.552,2.469 0.583,0.208 10 false CANL*c 1.177,0.583 1.76,0.792 0.583,0.208 10 false CANH*c 1.198,2.438 1.781,2.646 0.583,0.208 10 false CANL*d 1.344,0.323 1.927,0.531 0.583,0.208 10 false CANH*d 1.552,2.583 2.135,2.792 0.583,0.208 10 false CANL*e 1.448,0.083 2.031,0.292 0.583,0.208 10 false CANH*e 4.844,2.323 5.427,2.531 0.583,0.208 10 false CANL*f 4.896,0.333 5.479,0.51 0.583,0.177 10 false CANH*f 5.115,2.135 5.698,2.344 0.583,0.208 10 false CANL*g 5.219,0.563 5.802,0.74 0.583,0.177 10 false CANH*g
*a Front view of wire harness connector
(to No. 3 CAN Junction Connector)
*b to Central Gateway ECU (Network Gateway ECU)
*c to ECM *d to Inverter with Converter Assembly
*e to Hybrid Vehicle Control ECU Assembly *f to Brake Booster with Master Cylinder Assembly (Skid Control ECU)
*g to Vehicle Approaching Speaker Controller (w/ Vehicle Proximity Notification System) - -


Standard Resistance:
Tester Connection Condition Specified Condition Connected to

*: w/ Vehicle Proximity Notification System

G103-1 (CANH) - G103-11 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω Central gateway ECU (network gateway ECU)
G103-3 (CANH) - G103-13 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω ECM
G103-4 (CANH) - G103-14 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Inverter with converter assembly
G103-5 (CANH) - G103-15 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Hybrid vehicle control ECU assembly
G103-7 (CANH) - G103-17 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Brake booster with master cylinder assembly (skid control ECU)
G103-8 (CANH) - G103-18 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Vehicle approaching speaker controller*



Result:
Result Proceed to
OK A
NG (Central gateway ECU [network gateway ECU] CAN main wire) B
NG (ECM CAN main wire) C
NG (Wire to ECU or sensor) D



A

REPLACE NO. 3 CAN JUNCTION CONNECTOR

B

2.CHECK FOR SHORT IN CAN BUS WIRES (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)

C

3.CHECK FOR SHORT IN CAN BUS WIRES (ECM - NO. 3 CAN JUNCTION CONNECTOR)

D

4.CHECK FOR SHORT IN CAN BUS WIRES (ECU OR SENSOR)
2.CHECK FOR SHORT IN CAN BUS WIRES (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)
a.

Reconnect the G103 No. 3 CAN junction connector.


b.

Disconnect the central gateway ECU (network gateway ECU) connector.


c.
C409595C01
1.448,0.104 1.917,0.323 0.469,0.219 1.24,1.833 1.448,1.833 1.448,1.833 1.646,1.188 true 2.167,1.823 2,1.823 2,1.823 1.781,1.188 true 0.885,1.75 1.344,1.948 0.458,0.198 10 false CA4L 1.563,0.125 2.021,0.323 0.458,0.198 10 false G72 2.219,1.74 2.677,1.938 0.458,0.198 10 false CA4H 0.083,0.063 0.542,0.26 0.458,0.198 10 false *a
*a Front view of wire harness connector
(to Central Gateway ECU [Network Gateway ECU])


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G72-18 (CA4H) - G72-17 (CA4L) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)

3.CHECK FOR SHORT IN CAN BUS WIRES (ECM - NO. 3 CAN JUNCTION CONNECTOR)
a.

Reconnect the G103 No. 3 CAN junction connector.


b.
C405888C02
1.417,0.167 1.813,0.417 0.396,0.25 1.802,1.292 2.25,0.167 2.25,0.167 2.417,0.167 true 1.823,1.427 2.5,0.458 2.5,0.458 2.667,0.458 true 1.49,0.208 1.948,0.406 0.458,0.198 10 false A24 0.167,0.104 0.625,0.302 0.458,0.198 10 false *a 2.49,0.083 2.948,0.281 0.458,0.198 10 false CANH 2.75,0.396 3.208,0.594 0.458,0.198 10 false CANL
*a Front view of wire harness connector
(to ECM)


Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A24-8 (CANH) - A24-18 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (ECM - NO. 3 CAN JUNCTION CONNECTOR)

4.CHECK FOR SHORT IN CAN BUS WIRES (ECU OR SENSOR)
a.

Reconnect all wire harness connectors.


b.

Disconnect the connector that includes terminals CANH and CANL from the ECU or sensor to which the short circuited branch line is connected.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>TERMINALS OF ECU


c.
C368243C39
1.448,0.104 1.917,0.323 0.469,0.219 1.26,1.771 1.469,1.771 1.469,1.771 1.667,1.125 true 2.156,1.74 1.99,1.74 1.99,1.74 1.771,1.104 true 0.885,1.698 1.344,1.896 0.458,0.198 10 false CA4H 1.563,0.125 2.021,0.323 0.458,0.198 10 false G72 2.188,1.667 2.646,1.865 0.458,0.198 10 false CA4L 0.083,0.063 0.542,0.26 0.458,0.198 10 false *a
*a Component with harness connected
(Central Gateway ECU [Network Gateway ECU])


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G72-18 (CA4H) - G72-17 (CA4L) Cable disconnected from negative (-) auxiliary battery terminal 54 to 69 Ω


HINT:
·

If the resistance becomes normal (between 54 and 69 Ω) when the connector is disconnected from the ECU or sensor, there may be a short in the ECU or sensor.

·

If the resistance does not become normal when the connector is disconnected from the ECU or sensor, check for a short in the wire harness and repair or replace the wire harness or connector if necessary.




Result:
Proceed to
OK
NG



OK

REPLACE ECU OR SENSOR

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR