PARKING ASSIST ECU
Disconnect the N25 parking assist ECU connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| N25-1 (+B) - N25-4 (GND1) | L - LA | Power source signal | Always | 11 to 14 V |
| N25-4 (GND1) - Body ground | LA - Body ground | Ground | Always | Below 1 Ω |
| N25-3 (IG) - N25-4 (GND1) | BE - LA | IG power source signal | Engine switch on (IG) | 11 to 14 V |
| Engine switch off | Below 1 V | |||
| N25-2 (ACC) - N25-4 (GND1) | GR - LA | ACC power source signal | Engine switch on (ACC) | 11 to 14 V |
| Engine switch off | Below 1 V |
Reconnect the N25 parking assist ECU connector.
Measure the voltage, resistance and waveform according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| N24-6 (RSW+) - N25-4 (GND1) | BE - LA | Terminal required by law | Panoramic image being displayed | 0 to 2 V |
| Panoramic image not being displayed | 5.5 to 7.05 V | |||
| N24-7 (NS+) - N24-24 (NS-) | B - W | Video signal | Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 3) |
| N24-8 (NSG) - Body ground | BR - Body ground | Shield ground | Always | Below 1 Ω |
| N24-10 (LCV+) - N24-35 (LGND) | W - G | Side television camera assembly LH display signal input | Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Engine switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | |||
| N24-11 (SGND) - Body ground | BR - Body ground | Side television camera assembly LH ground (shield) | Always | Below 1 Ω |
| N24-12 (LCB+) - N24-36 (LGND) | B - G | Power source to side television camera assembly LH | Engine switch on (IG) | 5.5 to 7.05 V |
| N24-13 (BCV-) - N24-37 (BGND) | W - R | Front television camera assembly display ground | Always | Below 1 Ω |
| N24-14 (SGND) - Body ground | BR - Body ground | Front television camera assembly ground (shield) | Always | Below 1 Ω |
| N24-15 (BCB+) - N24-37 (BGND) | G - R | Power source to front television camera | Engine switch on (IG) | 5.5 to 7.05 V |
| N24-16 (RCV-) - N24-17 (RGND) | R - G | Side television camera assembly RH display ground | Always | Below 1 Ω |
| N24-17 (RGND) - Body ground | G - Body ground | Side television camera assembly RH display ground | Always | Below 1 Ω |
| N24-24 (NS-) - N25-4 (GND1) | W - LA | Video ground | Always | Below 1 Ω |
| N24-29 (CV+) - N24-32 (CGND) | B - G | Television camera assembly display signal input | Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Engine switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | |||
| N24-30 (CV-) - N24-32 (CGND) | W - G | Television camera assembly display ground | Always | Below 1 Ω |
| N24-31 (SGND) - Body ground | B - Body ground | Television camera assembly ground (shield) | Always | Below 1 Ω |
| N24-32 (CGND) - Body ground | G - Body ground | Television camera assembly ground | Always | Below 1 Ω |
| N24-33 (CB+) - N24-32 (CGND) | R - G | Power source to television camera assembly | Engine switch on (IG) | 5.5 to 7.05 V |
| N24-34 (LCV-) - N24-35 (LGND) | R - G | Side television camera assembly LH display ground | Always | Below 1 Ω |
| N24-35 (LGND) - Body ground | G - Body ground | Side television camera assembly LH ground | Always | Below 1 Ω |
| N24-36 (BCV+) - N24-37 (BGND) | B - R | Front television camera assembly display signal input | Waveform 1: Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Waveform 2: Engine switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | |||
| N24-37 (BGND) - Body ground | R - Body ground | Front television camera assembly display ground | Always | Below 1 Ω |
| N24-38 (RCV+) - N24-17 (RGND) | W - G | Side television camera assembly RH display signal input | Waveform 1: Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image | Pulse generation (See waveform 1) |
| Waveform 2: Engine switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen | Pulse generation (See waveform 2) | |||
| N24-39 (SGND) - Body ground | BR - Body ground | Side television camera assembly RH ground (shield) | Always | Below 1 Ω |
| N24-40 (RCB+) - N24-17 (RGND) | B - G | Power source to side television camera assembly RH | Engine switch on (IG) | 5.5 to 7.05 V |
| N25-11 (CANH) | GR | CAN communication line | - | - |
| N25-12 (CANL) | W | CAN communication line | - | - |
| N25-14 (REV) - N25-4 (GND1)*1 | W - LA | Reverse signal input | Engine switch on (IG), panoramic view monitor switch on, shift lever in R | Below 1 V |
| Engine switch on (IG), panoramic view monitor switch on, shift lever except R | 11 to 14 V | |||
| N25-15 (BLSW) - N25-4 (GND1) | G - LA | Panoramic view monitor switch signal | Engine switch on (IG), panoramic view monitor switch off | 5.5 to 6.5 V |
| Engine switch on (IG), panoramic view monitor switch on | Below 1 V | |||
| N25-16 (MPOS) - N25-4 (GND1)*2 | L - LA | Outer rear view mirror status signal input | Engine switch on (IG), retractable outer mirror switch on | Below 1 V |
| Engine switch on (IG), retractable mirror switch off | 11 to 14 V |
*1: for Manual Transaxle
*2: w/ Retract Mirror (w/o Auto Power Retract Mirror)
Using an oscilloscope, check the waveform.
| *a | Waveform 1 | *b | Waveform 2 |
| *c | Synchronization Signal | *d | Video Waveform |
Waveform 1, 2
| Item | Content |
|---|---|
| Terminal No. (Symbol) | ·
N24-10 (LCV+) - N24-35 (LGND) ·
N24-29 (CV+) - N24-32 (CGND) ·
N24-36 (BCV+) - N24-37 (BGND) ·
N24-38 (RCV+) - N24-17 (RGND) |
| Tool Setting | 200 mV/DIV., 50 μsec./DIV. |
| Condition | ·
Waveform 1: Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image ·
Waveform 2: Engine switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen |
The video waveform changes according to the image sent by the television camera assembly.
The video waveform is constantly output when the engine switch is on (ACC).
| *a | Waveform 3 (camera lens is not covered, displaying an image) |
| *b | Synchronization Signal |
| *c | Video Waveform |
Waveform 3
| Item | Content |
|---|---|
| Measurement terminal | N24-7 (NS+) - N24-24 (NS-) |
| Measurement setting | 200 mV/DIV., 50 μs./DIV. |
| Condition | Engine switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image |
The video waveform changes according to the image sent by the parking assist ECU.
RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio and Visual System)
RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Navigation System)
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU