If a malfunction in the ECM circuit occurs, the 4WD ECU assembly will output this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1280 | Engine Circuit Malfunction | When the following continues for 5 seconds or more:
·
Communication with ECM is operating normally, but engine control system is malfunctioning. |
·
Engine control system ·
4WD ECU assembly |
Check if the engine control system DTC is output.
for A25A-FKS (w/ Canister Pump Module): Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>SFI SYSTEM (w/ Canister Pump Module)>DTC CHECK / CLEAR
for A25A-FKS (w/o Canister Pump Module): Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>SFI SYSTEM (w/o Canister Pump Module)>DTC CHECK / CLEAR
for M20A-FKS: Click hereEngine / Hybrid System>M20A-FKS (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR
| Proceed to |
|---|
| Engine control system DTC is not output |
| Engine control system DTC is output |
Engine control system DTC is not output
Engine control system DTC is output
for A25A-FKS (w/ Canister Pump Module): Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>SFI SYSTEM (w/ Canister Pump Module)>DIAGNOSTIC TROUBLE CODE CHART
for A25A-FKS (w/o Canister Pump Module): Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>SFI SYSTEM (w/o Canister Pump Module)>DIAGNOSTIC TROUBLE CODE CHART
for M20A-FKS: Click hereEngine / Hybrid System>M20A-FKS (ENGINE CONTROL)>SFI SYSTEM>DIAGNOSTIC TROUBLE CODE CHART