The position control ECU assembly (driver seat) receives signals from the main body ECU (multiplex network body ECU) via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0208 | Lost Communication with "Seat Control Module A" | A communication malfunction between the position control ECU assembly (driver seat) and main body ECU (multiplex network body ECU) is detected for approximately 10 seconds or more. | CAN communication system |
Clear the DTCs.
Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (for HV Model with Memory)>DTC CHECK / CLEAR
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (for HV Model with Memory)>DTC CHECK / CLEAR
DTC U0208 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG