Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM (for HV Model)
RM3620E _58 Vehicle Interior _076405 SEAT _0374970 CLIMATE CONTROL SEAT SYSTEM(for HV Model) U

SEAT  CLIMATE CONTROL SEAT SYSTEM(for HV Model)  TERMINALS OF ECU  


CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


E409344C01
2.792,0.177 3.146,0.417 0.354,0.24 3.792,0.167 4.146,0.406 0.354,0.24 4.729,0.167 5.083,0.406 0.354,0.24 1.74,2.021 2.094,2.26 0.354,0.24 2.74,2.021 3.094,2.26 0.354,0.24 3.74,2.01 4.094,2.25 0.354,0.24 4.771,2 5.125,2.24 0.354,0.24 5.615,1.99 5.969,2.229 0.354,0.24 0.188,0.115 0.417,0.323 0.229,0.208 12 false *A 0.198,2.094 0.427,2.302 0.229,0.208 12 false *B 2.844,0.219 3.115,0.385 0.271,0.167 10 false G47 3.844,0.208 4.135,0.365 0.292,0.156 10 false G46 4.792,0.208 5.083,0.365 0.292,0.156 10 false z11 1.792,2.063 2.063,2.229 0.271,0.167 10 false G50 2.792,2.063 3.063,2.229 0.271,0.167 10 false G48 3.802,2.042 4.073,2.208 0.271,0.167 10 false G47 4.823,2.042 5.125,2.198 0.302,0.156 10 false G46 5.677,2.031 5.969,2.188 0.292,0.156 10 false z11
*A w/o Front Seat Heater *B w/ Front Seat Heater


a.

Disconnect the G46 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G46-6 (IG+) - Body ground GR - Body ground IG power supply Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
G46-17 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the G46 air conditioning amplifier assembly connector.


d.

Check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G46-7 (LIN1) - Body ground BE - Body ground LIN communication line Power switch on (IG) Pulse generation
G46-13 (ROUT) - Body ground LG - Body ground RH side seat blower control signal
·

Power switch on (IG)

·

RH side refreshing seat switch (seat blower switch) operate


Pulse generation
(See waveform)
G46-14 (LOUT) - Body ground G - Body ground LH side seat blower control signal
·

Power switch on (IG)

·

LH side refreshing seat switch (seat blower switch) operate


Pulse generation
(See waveform)

i.
B295627N02
0.156,1.594 0.594,1.833 0.438,0.24 10 false GND

Waveform (Reference):

Measurement Condition
Item Content
Tester Connection
·

G46-13 (ROUT) - Body ground

·

G46-14 (LOUT) - Body ground


Tool Setting 1 V/DIV., 1 ms/DIV.
Vehicle Condition
·

Power switch on (IG)

·

RH side refreshing seat switch (seat blower switch) operate

·

LH side refreshing seat switch (seat blower switch) operate






CHECK REFRESHING SEAT SWITCH (SEAT BLOWER SWITCH)


E407962N01
3.396,0.135 3.75,0.375 0.354,0.24 3.458,0.177 3.74,0.354 0.281,0.177 10 false G31

a.

Disconnect the G31 refreshing seat switch (seat blower switch) connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G31-9 (IG) - Body ground LA-R - Body ground IG power supply Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
G31-7 (E) - Body ground LA - Body ground Ground Always Below 1 Ω


c.

Reconnect the G31 refreshing seat switch (seat blower switch) connector.


d.

Check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G31-8 (SLIN) - Body ground B - Body ground LIN communication line Power switch on (IG) Pulse generation