Home › General › SPECIFICATIONS › M20A-FKS BATTERY / CHARGING › 2018.10–2019.09
RM3620E _V1 General _077121 SPECIFICATIONS _0380022 M20A-FKS BATTERY / CHARGING F

SPECIFICATIONS  M20A-FKS BATTERY / CHARGING  SERVICE DATA  


CHARGING SYSTEM
Battery Standard specific gravity 1.25 or higher at 20°C (68°F)
Standard voltage 12.3 V or higher at 20°C (68°F)
Fuse Standard resistance Below 1 Ω
Charging circuit without load Standard current 10 A or higher
Standard voltage 12.5 to 14.8 V
Charging circuit with load Standard current 30 A or higher

GENERATOR BRUSH HOLDER ASSEMBLY
Brush length Standard exposed brush length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed brush length 4.5 mm (0.177 in.)

GENERATOR ROTOR ASSEMBLY (for 100 A, 130 A Type)
Tester Connection Condition Specified Condition
Slip ring - Slip ring Approx. 20°C (68°F) 1.8 to 2.2 Ω (for 100 A Type)
1.6 to 2.0 Ω (for 130 A Type)
Slip ring - Rotor Always 10 MΩ or higher

Slip ring diameter Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)

GENERATOR ROTOR ASSEMBLY (for 150 A Type)
Tester Connection Condition Specified Condition
Slip ring - Slip ring Approx. 20°C (68°F) 1.5 to 1.9 Ω
Slip ring - Rotor Always 10 MΩ or higher

Slip ring diameter Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)