Home › General › SPECIFICATIONS › A25A-FKS COOLING
RM3620E _V1 General _077121 SPECIFICATIONS _0380024 A25A-FKS COOLING F

SPECIFICATIONS  A25A-FKS COOLING  SERVICE DATA  


COOLANT
Item Capacity Classification
w/o Oil Cooler 6.9 liters (7.3 US qts, 6.1 Imp. qts) TOYOTA vehicles are filled with TOYOTA SLLC at the factory. In order to avoid damaging the engine cooling system and other technical problems, only use TOYOTA SLLC or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
w/ Oil Cooler 7.0 liters (7.4 US qts, 6.2 Imp. qts)

THERMOSTAT
Condition Specified Condition
Standard valve opening temperature 80 to 84°C (176 to 183°F)
Standard valve lift 8.0 mm (0.315 in.) or more at 95°C (203°F)

Tester Connection Condition Specified Condition
1 - 2 Always 10.6 to 14.2 Ω

FLOW SHUTTING VALVE (for ATF)
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 22 to 28 Ω

FLOW SHUTTING VALVE (for Heater)
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 22 to 28 Ω

RADIATOR
Item Condition Specified Condition
Radiator cap sub-assembly Standard pressure
(for brand-new radiator cap sub-assembly)
74 to 103 kPa (0.8 to 1.1 kgf/cm2, 10.7 to 14.9 psi)
Minimum pressure
(for used radiator cap sub-assembly)
59 kPa (0.6 kgf/cm2, 8.6 psi)