Home › General › SPECIFICATIONS › CLUTCH
RM3620E _V1 General _077121 SPECIFICATIONS _0381814 CLUTCH F

SPECIFICATIONS  CLUTCH  TORQUE SPECIFICATIONS  


Clutch System
Part Tightened N*m kgf*cm in.*lbf
Clutch release bleeder sub-assembly x Bleeder plug 8.4 86 74

Clutch pedal (for LHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch pedal sub-assembly x Clutch pedal support sub-assembly 26 265 19
Clutch start switch assembly x Clutch pedal support sub-assembly 15.7 160 12
Clutch pedal sub-assembly x Body for nut A 12.7 130 9
for bolt B 15 153 11

Clutch pedal (for RHD)
Part Tightened N*m kgf*cm ft.*lbf
Clutch pedal sub-assembly x Clutch pedal support sub-assembly 26 265 19
Clutch start switch assembly x Clutch pedal support sub-assembly 15.7 160 12
Clutch pedal sub-assembly x Body 12.7 130 9

Clutch Master Cylinder
Part Tightened N*m kgf*cm ft.*lbf
Clutch master cylinder to flexible hose tube x Clutch master cylinder assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Stroke Sensor
Part Tightened N*m kgf*cm in.*lbf
Clutch pedal stroke sensor assembly x Clutch pedal support sub-assembly 8.5 87 75

Clutch Unit
Part Tightened N*m kgf*cm ft.*lbf
Clutch cover assembly x Flywheel sub-assembly 19.1 195 14
Clutch release bleeder sub-assembly x Manual transmission assembly 20 204 15
Clutch release cylinder with bearing assembly x Manual transaxle assembly 14 143 10
Clutch release cylinder to flexible hose tube x Clutch release cylinder with bearing assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10
Clamp x Clutch release cylinder with bearing assembly 20 204 15
Bleeder to flexible hose tube x Manual transaxle assembly 10 102 7
bleeder to flexible hose tube x Clutch release bleeder sub-assembly Specified tightening torque 15.2 155 11
When using a 10 mm union nut wrench 13.4 137 10

Clutch Pedal Switch
Part Tightened N*m kgf*cm ft.*lbf
Clutch switch assembly x Clutch pedal support sub-assembly 15.7 160 12