Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS
RM3620E _V1 General _077121 SPECIFICATIONS _0383081 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF Switch:
Tester Connection Condition Specified Condition
5 (+) - 2 (E) Switch pushed Below 1 Ω
5 (+) - 2 (E) Switch not pushed 10 kΩ or higher
Battery positive (+) → 6 (ILL+)
Battery negative (-) → 1 (ILL-)
- Illuminates


Integration Control and Panel Assembly (Brake Hold Switch (except Manual Transaxle)):
Tester Connection Condition Specified Condition
15 (E) - 24 (+B) Switch pushed Below 1 Ω
15 (E) - 24 (+B) Switch not pushed 10 kΩ or higher


Brake Warning Switch Assembly (Brake Hold Switch (for Manual Transaxle)):
Tester Connection Condition Specified Condition
10 (+B) - 12 (E) Switch pushed Below 1 Ω
10 (+B) - 12 (E) Switch not pushed 10 kΩ or higher


Integration Control and Panel Assembly (Downhill Assist Control Switch):
Tester Connection Condition Specified Condition
16 (E) - 19 (B) Switch pushed Below 1 Ω
16 (E) - 19 (B) Switch not pushed 10 kΩ or higher