Home › Engine / Hybrid System › A25B-FXS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID › from 2019.02
RM3620E _51 Engine / Hybrid System _080116 A25B-FXS ENGINE CONTROL _0389135 CAMSHAFT OIL CONTROL SOLENOID A

A25B-FXS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15370 1.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

HINT:

Perform this procedure only when replacement of the O-ring is necessary.


a.

Clean the O-ring groove of the cam timing oil control solenoid assembly.

NOTICE:

Make sure the O-ring groove is free of foreign matter.



b.

Install a new O-ring to the cam timing oil control solenoid assembly.

NOTICE:

Do not damage the O-ring when installing it.


HINT:

Perform this procedure only when replacement of the O-ring is necessary.



c.
A401879

Apply a light coat of engine oil to the O-ring of the cam timing oil control solenoid assembly.

NOTICE:

If reusing the cam timing oil control solenoid assembly, be sure to inspect the O-ring.



d.

Install the cam timing oil control solenoid assembly to the No. 2 timing chain cover assembly with 2 new bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the cam timing oil control solenoid assembly.




e.

Connect the cam timing oil control solenoid assembly connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK

Hide 12601B 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY