22030
1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Put the engine in Inspection Mode (Maintenance Mode).
| Tester Display |
|---|
| Inspection Mode |
Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range with the A/C switch off.
1050 to 1150 rpm
Be sure to perform this step with all accessories off.
Make sure that the shift lever is in P.
Perform a road test and confirm that there are no abnormalities.