Home › Engine / Hybrid System › A25B-FXS (ENGINE CONTROL) › MASS AIR FLOW METER › from 2019.02
RM3620E _51 Engine / Hybrid System _080116 A25B-FXS ENGINE CONTROL _0389139 MASS AIR FLOW METER A

A25B-FXS ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>A25B-FXS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>A25B-FXS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the mass air flow meter sub-assembly with the 2 screws.

NOTICE:
·

If the mass air flow meter sub-assembly has been struck or dropped, replace it.

·

If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.




b.

Connect the mass air flow meter sub-assembly connector.