Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for ERA-GLONASS) › 2019.02–2019.09
RM3620E _56 Audio / Visual / Telematics _076049 TELEMATICS _0389152 TELEMATICS SYSTEM(for ERA-GLONASS) C

TELEMATICS  TELEMATICS SYSTEM(for ERA-GLONASS)  B15F0  VIN Not Programmed or Mismatch - DCM  


DESCRIPTION

This DTC is stored when the Vehicle Identification Number (VIN) is not stored in the telephone transceiver assembly or when the VIN stored in the telephone transceiver assembly and the VIN stored in the ECM do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15F0 VIN Not Programmed or Mismatch - DCM When either of the following conditions is met for 7.5 seconds or more:
·

The VIN is not stored in the telephone transceiver assembly.

·

The VIN stored in the telephone transceiver assembly and the VIN stored in the ECM do not match.


·

SFI system

·

CAN communication system



PROCEDURE

1.REGISTER VIN
a.

Turn the power switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the power switch on (IG) and wait for 10 seconds.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / Telematics / Utility / Vin Synchronization

Body Electrical > Telematics > Utility
Tester Display
VIN Synchronization
50005 233 2391

f.

According to the display on the GTS, perform VIN Synchronization to register the VIN to the telephone transceiver assembly.


Result:
Proceed to
NEXT



NEXT

2.CHECK DTC
2.CHECK DTC
a.

Turn the power switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the power switch on (IG) and wait for 20 seconds.


d.

Turn the GTS on.


e.

Check for DTCs and check that no DTCs are output.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for ERA-GLONASS)>DTC CHECK / CLEAR

Body Electrical > Telematics > Trouble Codes
50001 233
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG

3.CHECK CAN COMMUNICATION SYSTEM
3.CHECK CAN COMMUNICATION SYSTEM
a.

Check if CAN communication system DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING

OK:

CAN communication system DTCs are not output.



Result:
Result
OK
NG



OK

NG